Danh mục sản phẩm

Code :

Code: 01
Display: ERROR CONDITION INVALID HEAD
Description: The ERROR light flashes.
Causes: The printhead was replaced with one that is not a genuine Zebra™ printhead.

Code: 02
Display: ERROR CONDITION RIBBON OUT
Description: The printer stops; the ERROR light flashes.
Causes: In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly.

Code: 03
Display: WARNING RIBBON IN
Description: The ERROR light flashes.
Causes: Ribbon is loaded, but the printer is set for direct thermal mode.

Code: 04
Display: ERROR CONDITION PAPER OUT
Description: The printer stops; the ERROR light flashes.
Causes: The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded.

Code: 05
Display: ERROR CONDITION HEAD OPEN
Description: The printer stops; the ERROR light flashes.
Causes: The printhead is not fully closed. The head open sensor is not working properly.

Code: 06
Display: THERMISTOR FAULT
Description: The ERROR light flashes.
Causes: The printhead has a faulty thermistor.

Code: 07
Display: WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD
Description: The printer stops; the ERROR light is on; the printer cycles through these three messages.
Causes: The printhead data cable is not properly connected. The printhead has a faulty thermistor.

Code: 08
Display: WARNING HEAD COLD
Description: The printer prints while the ERROR light flashes.
Causes: The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor.

1 2 3 4 > Last ›

0