Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Zebra ZM400 — Trang 5/5

Code: 33

Display:
Description: The printer fails to calibrate or detect the top of the label.
Causes: The printer was not calibrated for the label being used. The printer is configured for continuous media. The driver or software configuration is not set correctly.

Code: 34

Display:
Description: Non-continuous labels are being treated as continuous labels.
Causes: The printer was not calibrated for the media being used. The printer is configured for continuous media.

Code: 35

Display:
Description: All lights are on, but nothing displays on the LCD, and the printer locks up.
Causes: Internal electronic or firmware failure.

Code: 36

Display:
Description: The printer locks up while running the Power-On Self Test.
Causes: Main logic board failure.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie