Danh mục sản phẩm

Code :

Code: E000-0000
Description: Fixing temperature control startup error
Temperature of the Fixing Assembly did not reach the specified temperature within the specified period of time.
Remedy: 1. Check connectors on the fixing film unit. 2. Replace the fixing film unit. 3. Replace the engine controller PCB.

Code: E001-0000
Description: Abnormal high temperature of Fixing Assembly
Temperature of the Thermistor continuously exceeded a certain value.
Remedy: 1. Check connectors on the fixing film unit. 2. Replace the fixing film unit. 3. Replace the engine controller PCB.

Code: E003-0000
Description: Abnormal low temperature of Fixing Assembly
Fixing temperature was lower than the target value at printing/cleaning mode.
Remedy: 1. Check connectors on the fixing film unit. 2. Replace the fixing film unit. 3. Replace the engine controller PCB.

Code: E004-0000
Description: Fixing Heater drive circuit error
Abnormal frequency was detected in fixing drive circuit within the specified period of time from power-on.
Remedy: 1. Check connectors on the fixing film unit. 2. Replace the fixing film unit. 3. Replace the engine controller PCB.

Code: E100-0000
Description: Laser area failure
Scanner Motor control error Scanner Motor startup error BDI signal error
Remedy: 1. Check connectors on the scanner unit. 2. Replace the scanner unit. 3. Replace the engine controller PCB.

Code: E196-0000
Description: Error in Engine controller
A data communication error occurred in the Engine Controller PCB.
Remedy: Replace the Engine Controller PCB.

Code: E196-2000
Description: Error in main controller communication
Access to the Flash ROM in the Main Controller failed.
Remedy: Replace the Engine Controller PCB.

Code: E733-0000
Description: Printer communication error
Communication error between the Engine Controller PCB and the Main Controller PCB occurred.
Remedy: 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB. 3. Replace the Engine Controller PCB.?

1 2 >

0