• Code: E196-0000
• Description: Invalid RFU execution requested
• Causes: D-con update for the host machine or the optional cassette is not completed.
• Remedy:

• Code: E196-0001
• Description: Invalid RFU execution requested
• Causes: D-con update for the optional cassette is not completed.
• Remedy:

• Code: E198-0000
• Description: DC controller memory failure
• Causes: A checksum failure is found in the block where specific information of the DC controller PCB is saved. A communication error occurred when reading the specific information of the DC controller PCB from the NVRAM at power-on.
• Remedy: If the failure cannot be removed by turning the power OFF/ON, replace the DC controller PCB.

• Code: E602-0001
• Description: HDD error
• Causes: Lack of the HDD capacity The capacity of the HDD installed is smaller than that of the HDD used in the software.
• Remedy:

• Code: E602-0002
• Description: HDD error
• Causes: Bootable load failure A Bootable CD was not contained. A Bootable CD was damaged.
• Remedy: Burn the Bootable CD again.

• Code: E602-0003
• Description: HDD error
• Causes: HDD access error An error occurred caused by the device or hardware when accessing to the HDD during execution of bootrom. (Damage to the sector / Busy device status, etc.)
• Remedy: Turn on the power again.

• Code: E602-0006
• Description: HDD error
• Causes: SubBootable load failure A SubBootable CD was not contained. A SubBootable CD was damaged.
• Remedy: Burn the SubBootable CD again.

• Code: E602-0007
• Description: HDD error
• Causes: The contents (ICC-Profile, etc.) could not be detected. (The contents were not contained. The contents were damaged, etc.)
• Remedy: Burn the Bootable CD again.