Code :

Code: E5F6-8005
Description: Pushing position error
The paper pushing plate leading edge position sensor does not turn OFF when the paper pushing plate motor has been driven for 0.5 sec.
Remedy: 1. The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. 2. The paper pushing plate drive mechanism is faulty. 3. The paper pushing plate motor (M8) is faulty. 4. The saddle stitcher controller PCB is faulty.

Code: E5F6-8005
Description: Pushing position error
The paper pushing plate leading edge position sensor does not turn OFF when the paper pushing plate motor has been driven for 0.5 sec.
Remedy: 1. The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. 2. The paper pushing plate drive mechanism is faulty. 3. The paper pushing plate motor (M8) is faulty. 4. The saddle stitcher controller PCB is faulty.

Code: E609-0008
Description: Insufficient memory
Temperature of the HDD does not rise to the specified temperature within the specified period of time at the time of startup.
Remedy: HDD.

Code: E609-0009
Description: Hard disk error
At the time of recovery from sleep, it does not reach to the specified temperature
Remedy: HDD.

Code: E610
Description: Failure of the HDD encryption key (hardware configuration error/initialization error/encryption key error/encryption processing error)
Remedy: Turn OFF and then ON the power.

Code: E611-0000
Description: Rebooting due to SRAM corruption when executing a transmission job that secures disconnection of the power
In the case that reboot is repeated at recovery from power down because SRAM information is corrupted and the job information saved on SRAM cannot be read, the phenomenon that the communication is repeated occurs.
Remedy: Clear SRAM to erase the job that secures disconnection of the power.