• Code: E540-8003
• Description: Swing guide switch/Staple safety switch error
  The swing guide switch or staple safety switch is activated while the tray is operating.
• Remedy: 1. The tray 1 shift area sensor PCB is faulty. 2. The wiring between the finisher controller PCB and tray 1 shift motor is faulty. 3. The tray up/down mechanism is faulty. 4. The tray 1 shift motor (M107) is faulty. 5. The finisher controller PCB is faulty.

• Code: E540-8004
• Description: The tray 1 shift motor clock error
  The FG input cannot be detected when the tray 1 shift motor has been driven for 0.2 second.
• Remedy: 1. The tray 1 shift area sensor PCB is faulty. 2. The wiring between the finisher controller PCB and tray 1 shift motor is faulty. 3. The tray up/down mechanism is faulty. 4. The tray 1 shift motor (M107) is faulty. 5. The finisher controller PCB is faulty.

• Code: E540-8005
• Description: The tray 1 shift motor speed error
  The lock detection signal turns OFF 150 ms after the lock detection signal turned ON.
• Remedy: 1. The tray 1 shift area sensor PCB is faulty. 2. The wiring between the finisher controller PCB and tray 1 shift motor is faulty. 3. The tray up/down mechanism is faulty. 4. The tray 1 shift motor (M107) is faulty. 5. The finisher controller PCB is faulty.

• Code: E540-8006
• Description: The tray 1 shift motor acceleration error
  The lock detection signal does not turn ON when the tray 1 shift motor has been driven for 1 second.
• Remedy: 1. The tray 1 shift area sensor PCB is faulty. 2. The wiring between the finisher controller PCB and tray 1 shift motor is faulty. 3. The tray up/down mechanism is faulty. 4. The tray 1 shift motor (M107) is faulty. 5. The finisher controller PCB is faulty.

• Code: E540-8007
• Description: The tray 1 shift motor error
  The lock detection signal does not turn OFF when the tray 1 shift motor is at a stop.
• Remedy: 1. The tray 1 shift area sensor PCB is faulty. 2. The wiring between the finisher controller PCB and tray 1 shift motor is faulty. 3. The tray up/down mechanism is faulty. 4. The tray 1 shift motor (M107) is faulty. 5. The finisher controller PCB is faulty.

• Code: E542-0001
• Description: Additional Tray Lift Motor timeout error
  Unable to complete the operation even after the specified period of time during initial rotation. When the Motor remains in the same area for the specified period of time and the same symptom occurs again after the first retry, it is detected as an error.
• Remedy: 1. Check if the Motor (M12) Connector is physically removed. 2. Replace the Motor. 3. Check if the Additional Tray Clock Sensor (S23) Connector is physically removed. 4. Replace the Additional Tray Clock Sensor (S23).

• Code: E542-0005
• Description: Additional Tray Lift Motor clock error
  At initial rotation, when the Tray Lift Motor rotates and clock signal is not detected within the specified period of time, it is detected as an error if the same symptom occurs again after the first retry.
• Remedy: 1. Check if the Motor (M12) Connector is physically removed. 2. Replace the Motor. 3. Check if the Additional Tray Clock Sensor (S23) Connector is physically removed. 4. Replace the Additional Tray Clock Sensor (S23).

• Code: E542-8001
• Description: Tray 2 time out error
  If the tray does not return to home position when the tray 1 shift motor is driven for 25 seconds. If the tray does not move to other area when tray 2 shift motor is driven for 5 seconds.
• Remedy: 1. The Tray 2 shift area sensor PCB is faulty. 2. The wiring between the finisher controller PCB and tray 2 shift motor is faulty. 3. The tray up/down mechanism is faulty. 4. The Tray 2 shift motor (M105) is faulty. 5. The finisher controller PCB is faulty.