Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C2220L — Trang 35/45

Code: E613-0512

Description: Image memory is faulty or insufficient
No necessary memory at Main Controller PCB 2 side
Remedy: Make a 512MB memory at Main Controller PCB 2 side

Code: E613-1024

Description: Image memory is faulty or insufficient
No necessary memory at Main Controller PCB 2 side
Remedy: Make a 1024MB memory at Main Controller PCB 2 side

Code: E613-1536

Description: Image memory is faulty or insufficient
No necessary memory at Main Controller PCB 2 side
Remedy: Make a 1536MB memory at Main Controller PCB 2 side

Code: E614

Description: Flash PCB detection error
Remedy:

Code: E615-0001

Description: Error in self-diagnosis of the encryption module
An error was found in self-diagnosis of the encryption library.
Remedy: 1. Reinstall the system software. 2. Replace the HDD.

Code: E674-0001

Description: FAX Board communication error
The specified number of errors was detected with FAX Board communication
Remedy: Note: Note: For the part described as the Main Control PCB, it indicates Main Controller PCB 2 when the FAX Board is for 1 line, and Main Controller PCB 1 when the FAX Board is for 2 lines. 1. Check wire connection between the FAX Board and the Main Controller PCB 2. Replace the FAX Board 3. Replace the Main Controller PCB

Code: E674-0004

Description: FAX Board communication error
Error in access of the modem IC used by FAX
Remedy: Note: Note: For the part described as the Main Control PCB, it indicates Main Controller PCB 2 when the FAX Board is for 1 line, and Main Controller PCB 1 when the FAX Board is for 2 lines. 1. Check wire connection between the FAX Board and the Main Controller PCB 2. Replace the FAX Board 3. Replace the Main Controller PCB

Code: E674-0008

Description: FAX Board communication error
Error in access of the port IC used by OnBoardFax
Remedy: Note: Note: For the part described as the Main Control PCB, it indicates Main Controller PCB 2 when the FAX Board is for 1 line, and Main Controller PCB 1 when the FAX Board is for 2 lines. 1. Check wire connection between the FAX Board and the Main Controller PCB 2. Replace the FAX Board 3. Replace the Main Controller PCB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie