Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C2220L — Trang 36/45

Code: E674-000C

Description: FAX Board communication error
An error was detected in access of the modem IC or port IC used by Fax
Remedy: Note: Note: For the part described as the Main Control PCB, it indicates Main Controller PCB 2 when the FAX Board is for 1 line, and Main Controller PCB 1 when the FAX Board is for 2 lines. 1. Check wire connection between the FAX Board and the Main Controller PCB 2. Replace the FAX Board 3. Replace the Main Controller PCB

Code: E674-0010

Description: FAX Board communication error
Error in timer device to be used by FAX at activation
Remedy: Note: For the part described as the Main Control PCB, it indicates Main Controller PCB 2 when the FAX Board is for 1 line, and Main Controller PCB 1 when the FAX Board is for 2 lines. Replace the Main Controller PCB

Code: E674-0011

Description: FAX Board communication error
Error when the timer device to be used by FAX is started
Remedy: Note: For the part described as the Main Control PCB, it indicates Main Controller PCB 2 when the FAX Board is for 1 line, and Main Controller PCB 1 when the FAX Board is for 2 lines. Replace the Main Controller PCB

Code: E674-0030

Description: FAX Board communication error
Checksum error of USB-FAX MAINROM
Remedy: When the power is turned ON, get in the download mode from service mode to execute downloading of USBFAX MAINROM

Code: E677-0003

Description: Print server error
Error is detected by checking of the mother board at startup of the print server
Remedy: 1. Check cable connection and turn ON the power again 2. Reinstall the printer server

Code: E710-0001

Description: IPC initialization error
Unable to be ready within 3 sec after IPC chip was started
Remedy: Check the connection cable between the DC Controller PCB and the Finisher

Code: E711-0001

Description: IPC register error
4 or more errors are set to the error register of the IPC chip in 1.5 sec
Remedy: Check the connection cable between the DC Controller PCB and the Finisher

Code: E713-0001

Description: Finisher communication error 1
Continuous interruption to RX communication from the Finisher (Finisher down is detected)
Remedy: Turn OFF and then ON the main power
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie