Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7580i — Trang 35/112

Code: 260-1432-05

Description: Power supply error
Causes: The 24 V supply to the motor or solenoid was not detected. (Blowout of FU4 and 5 on the Multipurpose Tray Pickup Driver PCB)
Remedy: [Related parts] R1.00 - Harness connecting from the Multi-purpose Tray Pickup Driver PCB (UN97/J1359) to the Multipurpose Tray Lifter Motor, Multi-purpose Tray Pickup Motor and Multi-purpose Tray Pickup Solenoid (M90/J8544, M91/J8545 and SL10/J8546) - Multi-purpose Tray Lifter Motor (M90) - Multi-purpose Tray Pickup Motor (M91) - Multi-purpose Tray Pickup Solenoid (SL10) - Multi-purpose Tray Pickup Driver PCB (UN97) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 260-1472-05

Description: Power supply error
Causes: The 24 V supply to the Decurler Advancement Adjusting Motor was not detected. (Blowout of FU3 on the Buffer Driver PCB)
Remedy: [Related parts] R1.00 - Harness between the Buffer Driver PCB (UN98/J2104) and the Decurler Advancement Adjusting Motor (M53/J5102) - Decurler Advancement Adjusting Motor (M53) - Buffer Driver PCB (UN98) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 260-2511-05

Description: Power supply error
Causes: The 5 V supply to the sensor or the 24 V supply to the solenoid and motor was not detected. (Blowout of FU9, 10, 11, 16, 17, 18 and 19 on the Pickup Feed Driver PCB)
Remedy: [Related parts] R1.00 - Harness connecting from the Pickup Feed Driver PCB (UN4/J1485) to the Left Deck Pickup Sensor, Left Deck Pull-Out Sensor and Left Deck Pickup Solenoid (PS54/J7053, PS58/J7049 and SL6/J8000) - Harness between the Pickup Feed Driver PCB (UN4/J1485) and the Left Deck Pickup Motor (M42/J7048) - Harness between the Pickup Feed Driver PCB (UN4/J1483) and the Secondary Transfer Roller Detachment Motor (M31/J7003) - Harness between the Pickup Feed Driver PCB (UN4/J1487) and the Cassette Vertical Path Motor (M39/J7527) - Harness between the Pickup Feed Driver PCB (UN4/J1483) and the Left Deck Vertical Path Motor (M41/J7526) - Left Deck Pickup Sensor (PS54) - Left Deck Pull-Out Sensor (PS58) - Left Deck Pickup Solenoid (SL6) - Left Deck Pickup Motor (M42) - Secondary Transfer Roller Detachment Motor (M31) - Cassette Vertical Path Motor (M39) - Left Deck Vertical Path Motor (M41) - Pickup Feed Driver PCB (UN4) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 260-2514-05

Description: Power supply error
Causes: The 5 V supply to the sensor or the 24 V supply to the fan, motor and solenoid was not detected. (Blowout of FU3, 5, 6, 29, 32 and 52 on the Pickup Feed Driver PCB)
Remedy: [Related parts] R1.00 - Harness between the Pickup Feed Driver PCB (UN4/J1494) and the Outer Delivery Sensor 2 (PS133/J8571) - Harness connecting from the Pickup Feed Driver PCB (UN4/J1408) to the Delivery Flapper Solenoid and Delivery Heat Fan 1 and 2 (SL2/J7029, FM10/J7161 and FM11/J7541) - Harness connecting from the Pickup Feed Driver PCB (UN4/J1414) to the Delivery Heat Fan 3 and 4 (FM12/J7542 and FM13/J7543) - Harness connecting from the Pickup Feed Driver PCB (UN4/J1405) to the Delivery Motor, Reverse Motor and Reverse Disengagement Motor (M37/J7002, M38/J7000 and M54/J7030) - Outer Delivery Sensor 2 (PS133) - Delivery Flapper Solenoid (SL2) - Delivery Heat Fan 1, 2, 3 and 4 (FM10, FM11, FM12 and FM13) - Delivery Motor (M37) - Reverse Motor (M38) - Reverse Disengagement Motor (M54) - Pickup Feed Driver PCB (UN4) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 260-2522-05

Description: Power supply error
Causes: The 12 V or 24 V supply to the Multi-purpose Tray Pickup Driver PCB was not detected. (Blowout of FU13, 24 and 25 on the Drum Driver PCB)
Remedy: [Related parts] R1.00 - Harnesses between the Drum Driver PCB (UN6/J1902 and J1925) and the Multi-purpose Tray Pickup Driver PCB (UN97/J1351 and J1350) - Multi-purpose Tray Pickup Driver PCB (UN97) - Drum Driver PCB (UN6) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 261-0301-05

Description: Power supply error
Causes: The 12 V supply to the Multi Deck was not detected. (Blowout of FU2 on the DC Controller PCB)
Remedy: [Related parts] R1.00 - Harnesses connecting the DC Controller PCB (UN2/J1231), the Drawer Unit (J8240) and the Multi Deck - Multi Deck - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 261-0302-05

Description: Power supply error
Causes: The 24 V supply to the driver PCB or the 3.5K Deck was not detected. (Blowout of FU1 on the DC Controller PCB)
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1212) and the Pickup Feed Driver PCB (UN4/ J1486) - Harness between the DC Controller PCB (UN2/J1252) and the Developing Assembly Control PCB (UN96/J1308) - Harnesses connecting the DC Controller PCB (UN2/J1222), the Drawer Unit (J8023) and the Fixing Feed Driver PCB (UN5/J1510) - Harness between the DC Controller PCB (UN2/J1225) and the Drum Driver PCB (UN6/J1901) - Harness between the Drum Driver PCB (UN6/J1920) and the 3.5K Deck Lattice (J7515C) - Pickup Feed Driver PCB (UN4) - Developing Assembly Control PCB (UN96) - Fixing Feed Driver PCB (UN5) - Drum Driver PCB (UN6) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 261-0406-05

Description: Power supply error
Causes: The 24 V supply to the Developing Assembly Control PCB was not detected. (Blowout of FU9 on the DC Controller PCB)
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1201) and the Developing Assembly Control PCB (UN96/J1300) - Developing Assembly Control PCB (UN96) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie