Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7580i — Trang 37/112

Code: 262-1310-05

Description: Power supply error
Causes: The 24 V supply to the Developing Assembly Control PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1201) and the Developing Assembly Control PCB (UN96/J1300) - Developing Assembly Control PCB (UN96) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 262-1400-05

Description: Power supply error
Causes: The 24 V supply to the DC Controller PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1200) and the Relay PCB (UN7/J1817) - Relay PCB (UN7) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 262-1410-05

Description: Power supply error
Causes: The 24 V supply to the Developing Assembly Control PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1252) and the Developing Assembly Control PCB (UN96/J1308) - Developing Assembly Control PCB (UN96) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 262-2000-05

Description: Power supply error
Causes: The 24 V supply to the Relay PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the Relay PCB (UN7/J1803) and the DC Power Supply PCB (24VB) (UN35/ J2020) - Harness between the AC Driver PCB (UN8/J810 and J813) and the DC Power Supply PCB (24VB) (UN35/J1020) - Harness between the Relay PCB (UN7/J1821) and the Pickup Feed Driver PCB (UN4/J1480) - Harness between the Pickup Feed Driver PCB (UN4/J1490) and the AC Driver PCB (UN8/J811) - DC Power Supply PCB (24VB) (UN35) - Relay PCB (UN7) - Pickup Feed Driver PCB (UN4) - AC Driver PCB (UN8) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 262-2100-05

Description: Power supply error
Causes: The 24 V supply to the Pickup Feed Driver PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the Relay PCB (UN7/J1821) and the Pickup Feed Driver PCB (UN4/J1480) - Pickup Feed Driver PCB (UN4) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 262-2200-05

Description: Power supply error
Causes: The 24 V supply to the Buffer Driver PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the Relay PCB (UN7/J1806) and the Buffer Driver PCB (UN98/J2100) - Buffer Driver PCB (UN98) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 262-2210-05

Description: Power supply error
Causes: The 24 V supply to the Decurler Motor was not detected.
Remedy: [Related parts] R1.00 - Harness between the Buffer Driver PCB (UN98/J2107) and the Decurler Feeding Motor (M51/ J7510) - Decurler Feeding Motor (M51) - Decurler Advancement Adjusting Motor (M53) - Buffer Driver PCB (UN98) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 262-2300-05

Description: Power supply error
Causes: The 24 V supply to the Pickup Feed Driver PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the Relay PCB (UN7/J1821) and the Pickup Feed Driver PCB (UN4/J1480) - Pickup Feed Driver PCB (UN4) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie