Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7580i — Trang 42/112

Code: 280-0101-04

Description: Communication error
Causes: Communication between the Reader Controller PCB and the DADF Scanner Unit was not completed within the specified period of time.
Remedy: [Related parts] R1.00 - Harness between the DADF Scanner Unit (J1102) and the Reader Controller PCB (UN1/J105) - Harness between the Reader Controller PCB (UN1/J109) and the Riser PCB (UN159/J7) - DADF Scanner Unit - Reader Controller PCB (UN1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 280-0102-04

Description: Communication error
Causes: Disconnection of FFC between the Reader Controller PCB and the DADF Scanner Unit was detected.
Remedy: Check/replace the harness between the DADF Scanner Unit (J1102) and the Reader Controller PCB (UN1/J105).

Code: 302-0001-04

Description: Error in paper front white shading
Causes: An access error to the paper front white shading RAM or a paper front white shading value that was higher than the specified value was detected.
Remedy: [Related parts] R1.00 - Harness between the Reader Scanner Unit (UN2/J1101) and the Reader Controller PCB (UN1/ J106) - Harness between the Reader Controller PCB (UN1/J109) and the Riser PCB (UN159/J7) - Reader Scanner Unit (UN2) - Reader Controller PCB (UN1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 302-0002-04

Description: Error in paper front black shading
Causes: An access error to the paper front black shading RAM or a paper front black shading value that was higher than the specified value was detected.
Remedy: [Related parts] R1.00 - Harness between the Reader Scanner Unit (UN2/J1101) and the Reader Controller PCB (UN1/ J106) - Harness between the Reader Controller PCB (UN1/J109) and the Riser PCB (UN159/J7) - Reader Scanner Unit (UN2) - Reader Controller PCB (UN1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 302-0101-04

Description: Error in paper back white shading
Causes: An access error to the paper back white shading RAM or a paper back white shading value that was higher than the specified value was detected.
Remedy: [Related parts] R1.00 - Harness between the DADF Scanner Unit (J1102) and the Reader Controller PCB (UN1/J105) - Harness between the Reader Controller PCB (UN1/J109) and the Riser PCB (UN159/J7) - DADF Scanner Unit - Reader Controller PCB (UN1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 302-0102-04

Description: Error in paper back black shading
Causes: An access error to the paper back black shading RAM or a paper back black shading value that was higher than the specified value was detected.
Remedy: [Related parts] R1.00 - Harness between the DADF Scanner Unit (J1102) and the Reader Controller PCB (UN1/J105) - Harness between the Reader Controller PCB (UN1/J109) and the Riser PCB (UN159/J7) - DADF Scanner Unit - Reader Controller PCB (UN1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 350-0000-00

Description: System error
Causes: System error
Remedy: Contact the service company office

Code: 350-0001-00

Description: System error
Causes: System error
Remedy: Contact the service company office
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie