Causes: The 6 V supply to the Drum Driver PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1225) and the Drum Driver PCB (UN6/J1901) - Drum Driver PCB (UN6) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
Causes: The 5 V supply to the Drum Driver PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the Drum Driver PCB (UN6/J1902) and the Multi-purpose Tray Pickup Driver PCB (UN97/J1351) - Harness connecting from the Drum Driver PCB (UN6/J1905) to the Drum Motor (Y) and Drum Motor (M) (M21/J7300 and M23/J7302) - Harness between the Drum Driver PCB (UN6/J1906) and the Drum Motor (C) (M25/J7304) - Harness between the Drum Driver PCB (UN6/J1907) and the Drum Motor (Bk) (M19/J7306) - Drum Motor (Y, M, C and Bk) (M21, M23, M25 and M19) - Multi-purpose Tray Pickup Driver PCB (UN97) - Drum Driver PCB (UN6) [Remedy] Check/replace the related harness/cable, connector and parts.
Causes: The 6 V supply to the Developing Assembly Control PCB was not detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1252) and the Developing Assembly Control PCB (UN96/J1308) - Developing Assembly Control PCB (UN96) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
Causes: The 5 V supply to the Developing Assembly Control PCB was not detected.
Remedy: [Related parts] R1.00 - Harness connecting from the Developing Assembly Control PCB (UN96/J1310) to the Toner Container Replacement Cover Sensor and Toner Container Replacement Door Sensor (Y, M, C and Bk) (PS6/J7137, PS10/J7122, PS13/J7125, PS16/J7128 and PS7/J7138) - Harness between the Developing Assembly Control PCB (UN96/J1306) and the Front Door Lock Sensor (PS134/J8577) - Harness connecting from the Developing Assembly Control PCB (UN96/J1307) to the Toner Container ID Read Sensor (Y, M, C and Bk) (UN122/J4101, UN123/J4102, UN124/J4103 and UN125/J4104) - Related sensors - Developing Assembly Control PCB (UN96) [Remedy] Check/replace the related harness/cable, connector and parts.
Causes: The 6 V supply to the Fixing Feed Driver PCB was not detected.
Remedy: [Related parts] R1.00 - Harnesses connecting the DC Controller PCB (UN2/J1222), the Drawer Unit (J8023) and the Fixing Feed Driver PCB (UN5/J1510) - DC Controller PCB (UN2) - Fixing Feed Driver PCB (UN5) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
Causes: The 5 V supply to the Fixing Feed Driver PCB was not detected.
Remedy: [Related parts] R1.00 - Harness connecting from the Fixing Feed Driver PCB (UN5/J1502) to the Duplex Sensor 2, 3 and 4 (PS25/J7208, PS26/J7209 and PS27/J7210) - Harness connecting from the Fixing Feed Driver PCB (UN5/J1503) to the Secondary Transfer Roller Detachment HP Sensor, Loop Sensor 1/2 and Pre-fixing Feed Position Sensor (PS22/ J7214, PS90/J7224, PS91/J7225 and PS135/J8573) - Harness connecting from the Fixing Feed Driver PCB (UN5/J1512) to the Vertical Path Merging Sensor and Pre-registration Disengagement HP Sensor (PS30/J7213 and PS137/J8622) - Harness connecting from the Fixing Feed Driver PCB (UN5/J1508) to the Core HP Sensor, Fixing Pressure Release Sensor and Half Pressure Position Sensor (PS98/J7218, PS73/J7220 and PS110/J8033) - Related sensors - Fixing Feed Driver PCB (UN5) [Remedy] Check/replace the related harness/cable, connector and parts.
Causes: The 5 V supply to the Fixing Feed Driver PCB was not detected.
Remedy: [Related parts] R1.00 - Harness connecting from the Fixing Feed Driver PCB (UN5/J1503) to the Loop Sensor 1 and 2 (PS90/J7224 and PS91/J7225) - Loop Sensor 1 and 2 (PS90 and PS91) - Fixing Feed Driver PCB (UN5) [Remedy] Check/replace the related harness/cable, connector and parts.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.