Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C9075 Pro — Trang 58/67

Code: E720-0001

Description: Model mismatch error. An accessory that is not supported is connected.
Remedy: Check the configuration of accessories. The Staple Finisher B1 is connected to the IR ADV C9075.

Code: E720-0002

Description: Model mismatch error. An accessory that is not supported is connected.
Remedy: Check the configuration of accessories. The Staple Finisher B1 is connected to the IR ADV C9065.

Code: E720-0003

Description: Model mismatch error. An accessory that is not supported is connected.
Remedy: Check the configuration of accessories. The Staple Finisher B1 is connected to the IR ADV C9065.

Code: E720-0004

Description: Model mismatch error. A Finisher that is not supported is connected.
Remedy: Check the configuration of accessories.

Code: E730-1001

Description: PDL software failure. Initialization error
Remedy: 1. PDL reset processing 2. Power cycle (Power OFF/ON)

Code: E730-100A

Description: PDL software failure. In case system fatal error such as initialization failure occurs
Remedy: 1. PDL reset processing 2. Power cycle (Power OFF/ON)

Code: E730-A006

Description: PDL software failure. No response from PDL. In the case of no response from PDL due to Subbootable failure or no existence.
Remedy: 1. PDL reset processing 2. Power cycle (Power OFF/ON) 3. Main controller board connection check 4. Re-installation of firmware 5. Main controller board replacement

Code: E730-A007

Description: PDL software failure. In case of discrepancy of the version between the control software in main unit and PDL control software.
Remedy: 1. PDL reset processing 2. Power cycle (Power OFF/ON) 3. System full-format and installation
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie