Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C9075 Pro — Trang 61/67

Code: E743-0000

Description: DDI communication error. The reader controller PCB detected a failure in communication between the main controller PCB and the reader controller PCB.
Remedy: 1. Turn OFF and then ON the power. 2. Check the connection of the Cable between Reader and Controller. 3. Check the voltage (+24V and +12V) on the Reader Controller PCB. 4. Replace the DDI-S Cable. 5. Replace the Reader Controller PCB. 6. Replace the Main Controller PCB 2.

Code: E743-0003

Description: DDI communication error. The reader controller PCB detected a failure in communication between the main controller PCB and the reader controller PCB.
Remedy: 1. Turn OFF and then ON the power. 2. Check the connection of the Cable between Reader and Controller. 3. Check the voltage (+24V and +12V) on the Reader Controller PCB. 4. Replace the DDI-S Cable. 5. Replace the Reader Controller PCB. 6. Replace the Main Controller PCB 2.

Code: E743-0004

Description: DDI communication error. The reader controller PCB detected a failure in communication between the main controller PCB and the reader controller PCB.
Remedy: 1. Turn OFF and then ON the power. 2. Check the connection of the Cable between Reader and Controller. 3. Check the voltage (+24V and +12V) on the Reader Controller PCB. 4. Replace the DDI-S Cable. 5. Replace the Reader Controller PCB. 6. Replace the Main Controller PCB 2.

Code: E744

Description: Language file /BootROM is abnormal. In case of discrepancy in the version between Bootable and the language in the HDD
Remedy: Download the language file of correct version

Code: E746

Description: Image analysis board self-check failure detection. Image analysis board self-check failure detection
Remedy: 1. Connection check of the image analysis board 2. Image analysis board replacement

Code: E748

Description: Flash board error
Remedy: Flash board replacement

Code: E753-0001

Description: Error in Finisher Boot software. The Boot software has not been written in ROM of the finisher controller.
Remedy: 1. The finisher controller PCB is faulty. 2. The host machine controller PCB is faulty

Code: E804-0000

Description: Power supply cooling fan (FM3) error. When detect a failure of the power supply cooling fan
Remedy: Connector disconnection, a fan failure
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie