• Code: E000 0000
• Description: Error in temperature rising of Fixing Assembly
• Causes: Temperature of the Fixing Assembly did not reach a certain temperature within the specified period of time.
• Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E001 0000
• Description: Abnormal high temperature of Fixing Assembly
• Causes: It was detected that the temperature of the Fixing Assembly was abnormally high.
• Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E003 0000
• Description: Abnormal low temperature of Fixing Assembly
• Causes: It was detected that the temperature of the Fixing Assembly was abnormally low.
• Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB.

• Code: E004 0000
• Description: Error in fixing power supply drive circuit
• Causes: Failed to detect the zero cross signal for the specified period of time or more.
• Remedy: 1. Check the connection of connector between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E014 0000
• Description: Error in startup of the Main Motor
• Causes: Revolution of the Main Motor did not reach the specified value.
• Remedy: 1. Check the connection of connector between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB.

• Code: E100 0000
• Description: Laser Scanner Assembly error
• Causes: At the Laser Scanner Unit, BD cycle was not within the specified range.
• Remedy: 1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit. 2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit. 3. Replace the Laser Scanner Unit.

• Code: E196 1000
• Description: Main Controller PCB reading/writing error
• Causes: Error in reading/writing of main program in the Main Controller PCB
• Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

• Code: E196 2000
• Description: Main Controller PCB reading/writing error
• Causes: Error in reading/writing of setting values storage area in the Main Controller PCB
• Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.