Description: Card Reader communication error (serial communication)
Causes: Communication with the Card Reader could not be started at startup.
Remedy: 1. Check the connection of the Card Reader-F1, and turn OFF and then ON the main power switch. 2. Remove the Card Reader-F1. NOTE: After performing the remedy work above, go through the following to clear the error: COPIER> FUNCTION> CLEAR> E719- CLR.
Causes: Communication error between the Engine Controller PCB and the Main Controller PCB occurred.
Remedy: 1. Check the connection of connector between the Engine Controller PCB and the Main Controller PCB. 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB. 4. Replace the Engine Controller PCB.