Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR1133iF — Trang 8/9

Code: E744 1001

Description: Firmware version error
Causes: Version of the main program and the version of the start-up program was not matched.
Remedy: Install the set of the controller firmware.

Code: E744 4000

Description: Engine ID error
Causes: Invalid engine connection was detected.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the Engine Controller PCB. 3. Install the Engine Controller PCB. 4. Install the set of the controller firmware. 5. Check the model code. (When the model code and the engine code are mismatched, E744-4000 occurs.)

Code: E744 5000

Description: Error in the Control Panel PCB
Causes: Error in the Control Panel PCB (microcomputer).
Remedy: 1. Check the Control Panel PCB, and install the firmware (PANEL). 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB.

Code: E744 6000

Description: Communication error with the Wireless LAN PCB
Causes: Unable to communicate with the Wireless LAN.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Wireless LAN. 3. Install the set of the controller firmware. 4. Replace the Main Controller PCB.

Code: E744 7000

Description: Main Controller PCB error
Causes: An error in the microcomputer which retains fax job information of the Main Controller PCB.
Remedy: 1. Install the firmware of BKUP. 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB.

Code: E746 0000

Description: Main Controller PCB error
Causes: Main Controller communication error occurred (other than scan).
Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

Code: E766 8000

Description: Digital registration error
Causes: Information at digital registration could not be obtained.
Remedy: 1. Install the Engine Controller firmware. 2. Install the set of the controller firmware. 3. Replace the Engine Controller PCB

Code: E766 9000

Description: Scanner power state error
Causes: An error was detected in power state of the Laser Scanner Unit.
Remedy: 1. Install the set of the controller firmware. 2. Replace the Laser Scanner Unit
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie