Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3235 — Trang 12/30

Code: E530-8001

Description: Rear alignment error (Finisher-S1)
The home position sensor does not go on within 2000 msec after the start of operation when the rear aligning plate is shifted to home position.
Remedy: Replace the finisher controlled PCB. Replace the rear alignment motor. Check the rear aligning plate drive mechanism. Check the rear alignment home position sensor.

Code: E530-8002

Description: Rear alignment error (Finisher-S1)
The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
Remedy: Replace the finisher controlled PCB. Replace the rear alignment motor. Check the rear aligning plate drive mechanism. Check the rear alignment home position sensor.

Code: E531-0001

Description: Stapler error (External finisher)
The home position sensor does not go off even when the stapler motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the stapler. Check the harness.

Code: E531-0002

Description: Stapler error (External finisher)
The home position sensor does not go on even when the stapler motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the stapler. Check the harness.

Code: E531-8001

Description: Stapler error (Finisher-S1)
At time of staple jam recovery, the home position sensor does not go on with 500 msec after the start of reverse rotation of the stapler motor.
Remedy: Replace the finisher controller PCB. Replace the stapler. Check the harness.

Code: E531-8002

Description: Stapler error (Finisher-S1)
The home position sensor does not go off within 500 msec after the stapler motor has been started.
Remedy: Replace the finisher controller PCB. Replace the stapler. Check the harness.

Code: E532-0001

Description: Stapler shift error (External finisher)
The home position sensor does not go off even after the stapler shift motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the swing cam motor. Check the swing cam home position sensor. Check the harness.

Code: E532-0002

Description: Stapler shift error (External finisher)
The home position sensor does not go on even when the stapler shift motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the swing cam motor. Check the swing cam home position sensor. Check the harness.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie