Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR5075 — Trang 8/21

Code: E315-0400

Description: There is a fault in the image data.
Shift device A timeout
Remedy: - Turn off/on the power switch. Replace the PCB for frequent error occurrence.

Code: E315-0401

Description: There is a fault in the image data.
Shift device B timeout
Remedy: - Turn off/on the power switch. Replace the PCB for frequent error occurrence.

Code: E503-0002

Description: There is an error in the finisher internal communication (finisher).
There is an error in the communication between the finisher and the saddle unit.
Remedy: - Check the connection between the saddle stitcher controller PCB and the finisher controller PCB.

Code: E503-0003

Description: There is an error in the finisher internal communication (finisher).
There is an error in the communication between the finisher and the punch unit.
Remedy: - Check the communication between the saddle stitcher controller PCB and the finisher controller PCB.

Code: E505-0001

Description: There is a finisher backup memory error (finisher).
An error has occurred in the data stored in the backup memory.
Remedy: - Turn off the main power; check the DC controller PCB and the finisher controller PCB for wiring; check the 24-V system fuse; then, turn the main power back on.

Code: E505-0002

Description: There is a finisher backup memory error (finisher).
There is an error in the punch unit EEPROM data.
Remedy: - Turn off the main power; check the DC controller PCB and the puncher controller PCB for wiring; then, check the 24-V system fuse; then, turn the main power back on.

Code: E514-8001

Description: There is a trailing edge assist motor error (finisher).
The home position sensor does not go off even when the trailing edge assist motor has rotated for a specific period of time.
Remedy: 1. Check the trailing edge assist home position sensor. Is the sensor normal? 2. Check the wiring between the finisher controller PCB and the trailing edge assist motor. Is it normal? 3. Check the trailing edge assist mechanism. Is there a fault? 4. Try replacing the trailing edge assist motor. Is the problem corrected?

Code: E514-8002

Description: There is a trailing edge assist motor error (finisher).
The home position sensor does not go on even when the trailing edge assist motor has rotated for a specific period of time.
Remedy: 1. Check the trailing edge assist home position sensor. Is the sensor normal? 2. Check the wiring between the finisher controller PCB and the trailing edge assist motor. Is it normal? 3. Check the trailing edge assist mechanism. Is there a fault? 4. Try replacing the trailing edge assist motor. Is the problem corrected?
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie