• Code: E197-0000
• Description: There is an error in communication between the DC controller PCB and the video PCB/an error in communication of the DC controller PCB.
  An error in the communication between the DC controller PCB and the video PCB has occurred.
• Remedy:

• Code: E197-0001
• Description: There is an error in communication between the DC controller PCB and the video PCB/an error in communication of the DC controller PCB.
  An error in the communication with the laser driver module of the DC controller PCB has occurred.
• Remedy:

• Code: E225-1010
• Description: Error in CIS Unit (DADF)
  - The error is cleared by turning off/on the power switch. This triggers function-restricted mode. - CIS unit suspends its functions; only CCD unit performs duplexing reading. - Functions will be automatically restored by replacing CIS unit.
• Remedy:

• Code: E240-0000
• Description: The communication between the main controller PCB and the DC controller PCB is faulty.
  There is an error in the communication between the main controller PCB and the CPU of the DC controller PCB.
• Remedy: - Check the connector for any fault in connection. - Replace the DC controller PCB. - Replace the main controller PCB.

• Code: E315-0007
• Description: There is a fault in the image data.
  There is a JIBIG encode error.
• Remedy: - Turn off and then back on the power.

• Code: E315-000d
• Description: There is a fault in the image data.
  There is a JBIG decode error.
• Remedy: - Turn off and then back on the power.

• Code: E315-0200
• Description: There is a fault in the image data.
  CRC error detected in OpenI/F (image transfer from the external controller); retried but failed to restore.
• Remedy: - Replace the external controller connection PCB

• Code: E315-0300
• Description: There is a fault in the image data.
  Cubic timeout
• Remedy: - Turn off/on the power switch. Replace the PCB for frequent error occurrence.