Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR5075 — Trang 5/21

Code: E020-0001

Description: There is no toner in the developing assembly; there is an error in the detection of developing toner sensor connection; there is an error in the detection of hopper toner sensor connection.
At power-on, the connection of the developing assembly toner sensor is not detected.
Remedy: - Check the connector for any fault in connection. - Replace the sensor.

Code: E020-0002

Description: There is no toner in the developing assembly; there is an error in the detection of developing toner sensor connection; there is an error in the detection of hopper toner sensor connection.
At power-on, the connection of the developing hopper toner sensor is not detected.
Remedy: - Check the connector for any fault in connection. - Replace the sensor.

Code: E025-0001

Description: There is a toner feed motor over-current detection error, there is a toner bottle motor connection detection error.
An over-current has been detected in the toner feed motor.
Remedy: - Check the connector for any fault in connection. - Replace the motor.

Code: E025-0002

Description: There is a toner feed motor over-current detection error, there is a toner bottle motor connection detection error.
An over-current has been detected in the toner bottle motor.
Remedy: - Check the connector for any fault in connection. - Replace the motor.

Code: E025-0003

Description: There is a toner feed motor over-current detection error, there is a toner bottle motor connection detection error.
At power-on, the connection of the toner bottle motor is not detected.
Remedy: - Check the connector for any fault in connection. - Replace the motor.

Code: E032-0001

Description: The NE controller counter has malfunctioned.
An open circuit has been detected for the count pulse signal.
Remedy: Turn off the main power, and check for an open circuit in the cable; then, turn the main power back on.

Code: E061-0001

Description: There is a potential control error/there is an APC error.
As a result of potential control, the drum surface potential (VL2) of the background is 200 V or higher (i.e., causing a solid black image).
Remedy: - Replace the potential sensor unit. - Replace the laser scanner unit. - Replace the DC controller PCB.

Code: E061-0002

Description: There is a potential control error/there is an APC error.
The primary charging output used at time of printer output and the drum surface potential after laser output is identified as being 200 V or more (i.e., causing a solid black image).
Remedy: - Replace the potential sensor unit. - Replace the laser scanner unit. - Replace the DC controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie