Mã lỗi Canon iR7086 — Trang 8/17
Code:
Tất cả lỗi (129)
E000-0000
E000-0010
E001-0001
E001-0002
E001-0003
E001-0004
E001-0010
E002-0000
E002-0001
E002-0010
E003-0000
E004-0000
E004-0001
E005-0000
E005-0010
E010-0000
E012-0000
E013-0000
E013-0010
E014-0000
E015-0000
E019-0000
E020-0001
E020-0002
E020-0003
E020-0004
E020-0005
E020-0006
E020-0007
E020-0008
E020-0009
E020-0010
E025-0000
E025-0001
E032-0001
E043-0000
E051-0001
E051-0002
E051-0003
E065-0000
E067-0000
E068-0000
E069-0000
E102-0001
E110-0000
E111-0000
E121-0001
E121-0002
E121-0003
E197-0000
E202-0001
E202-0002
E227-0001
E227-0002
E227-0003
E227-0004
E240-0000
E248-0000
E248-0001
E248-0002
E248-0003
E251-0000
E302-0000
E315-0007
E315-000d
E315-000e
E315-0100
E315-0200
E315-0300
E315-0400
E315-0401
E351-0000
E400-0001
E400-0002
E400-0003
E402-0000
E404-0000
E405-0000
E410-0000
E413-0001
E413-0002
E420-0000
E490-0001
E602
E604-0000
E609-0008
E609-0009
E610
E711-0001
E712-0001
E717-0001
E717-0002
E719-0001
E719-0002
E719-0003
E719-0011
E719-0012
E730-1001
E730-100A
E730-9004
E730-9005
E730-A006
E730-A007
E730-B013
E732-0001
E732-0010
E733-0000
E733-0001
E733-0010
E740-0002
E743-0000
E744-0001
E744-0002
E744-0003
E744-0004
E744-1000
E744-2000
E746-0003
E749-0001
E800
E804-0001
E804-0002
E804-0004
E805-0002
E820-0000
E823-0000
E840-0000
E840-0001
E850-
Description: A fault exists in the communication between the main controller and the DC controller.
A fault has occurred in the communication between the CPUs of the main controller and the DC controller.
Remedy: Disconnect and then connect the connector. Replace the DC controller PCB. Replace the main controller PCB.
Description: A fault exists in the following: main controller SRAM, reader controller EEPROM.
At start-up, an SRAM check error has occurred.
Remedy: Replace the main controller PCB.
Description: A fault exists in the following: main controller SRAM, reader controller EEPROM.
An error has occurred at time of power-on (EEPROM).
Remedy: Replace the reader controller PCB.
Description: A fault exists in the following: main controller SRAM, reader controller EEPROM.
An error has occurred during write operation (EEPROM).
Remedy: Replace the reader controller PCB.
Description: A fault exists in the following: main controller SRAM, reader controller EEPROM.
A read error has occurred after write operation (EEPROM).
Remedy: Replace the reader controller PCB.
Description: The inverter cooling fan rotation is faulty.
Remedy: Disconnect and then connect J1110 of the reader controller PCB. Replace the inverter cooling fan. Replace the reader controller PCB.
Description: Shading operation is faulty.
In the course of shading operation, the processing doses not end within the reader controller.
Remedy: Disconnect and then connect J1107 and J1108 of the reader controller PCB. Replace the reader controller PCB.
Description: The image data codec has a fault.
A JBIG encoder error has occurred.
Remedy: Replace the main controller PCB.