Mã lỗi Canon iR7086 — Trang 9/17
Description: The image data codec has a fault.
A JBIG decoding error has occurred.
Remedy: Replace the DDR-SDRAM. Replace the HDD. Replace the main controller PCB.
Description: The image data codec has a fault.
An error has occurred in the course of software decoding.
Remedy: Replace the DDR-SDRAM. Replace the HDD. Replace the main controller PCB.
Description: The image data codec has a fault.
An overrun error has occurred.
Remedy: Replace the main controller PCB.
Description: The image data codec has a fault.
The open I/F relay PCB has detected an error (no recovery after a retry).
Remedy: Replace the open I/F relay PCB (relay PCB between the main controller and PS controller).
Description: The image data codec has a fault.
Cubic time-out
Remedy: Turn off and then back on he power. Replace the main controller PCB.
Description: The image data codec has a fault.
Shift Device A time-out
Remedy: Turn off and then back on he power. Replace the main controller PCB.
Description: The image data codec has a fault.
Shift Device B time-out
Remedy: Turn off and then back on he power. Replace the main controller PCB.
Description: An error has occurred in the main controller communication.
At start-up, a main controller communication error has occurred.
Remedy: Replace the main controller PCB.