• Code: E711-0002
• Description: There is a fault in IPC communication. Saddle Unit
  There is a fault in data communication. The finisher controller, pedestal controller, or DC controller PCB is faulty. The connector between the finisher and the machine has poor connection. An error has been detected 4 times or more for 1.5 sec after the communication between the finisher and the machine is disrupted and, in addition, an attempt at recovery has failed.

• Code: E711-0002
• Description: There is a fault in IPC communication. Saddle Unit
  There is a fault in data communication. The finisher controller, pedestal controller, or DC controller PCB is faulty. The connector between the finisher and the machine has poor contact. An error has been detected 4 times or more within 1.5 sec after the communication between the finisher and the machine has been disrupted and, in addition, an attempt at recovery has failed.

• Code: E711-0002
• Description: There is a fault in IPC communication. DADF-K1
  There is a fault in data communication. The finisher controller, pedestal controller, or DC controller PCB is faulty. The connector between the finisher and the cassette pedestal has poor contact. An error has been detected 4 times or more within 1.5 sec after the communication between the finisher and the machine has been disrupted and, in addition, an attempt at recovery has failed.

• Code: E712
• Description: There is a fault in the communication between the ADF and the reader unit. DADF-K1
  There is a fault in data communication. The ADF controller or the reader controller PCB is faulty. The connector between the reader unit an the ADF has poor contact. An attempt at recovery fails 5 sec or more after the communication between the reader unit and the ADF has been disrupted.

• Code: E713
• Description: There is a fault in the communication between the finisher and the cassette pedestal. Saddle Unit
  There is a fault in data communication. The cassette pedestal controller or the finisher controller PCB is faulty. The communication between the finisher and the machine is disrupted.

• Code: E713
• Description: There is a fault in the communication between the finisher and the cassette pedestal. Finisher-M1
  There is a fault in data communication. The cassette pedestal controller or the finisher controller PCB is faulty. The communication between the finisher and the machine is disrupted.

• Code: E716
• Description: There is a fault in the communication between the cassette pedestal and the printer unit.
  There is a fault in data communication. The DC controller or the cassette pedestal controller PCB is faulty. An attempt at recovery fails for 2 sec or more after the communication between the cassette pedestal and the machine has failed.

• Code: E717-0000
• Description: The communication with the NE controller is faulty.
  The communication with the NE controller is disrupted and is not resumed within 3 sec thereafter.