Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC3220N — Trang 8/19

Code: E404

Description: There is a fault in the delivery motor. DADF-K1
The face-down delivery motor (M3) fails to rotate. The facedown delivery motor clock sensor (SR7) is faulty. The face-down delivery motor encoder pulse is not detected within 0.3 sec after the face-down delivery motor drive signal has been turned ON.

Code: E500

Description: There is a fault in finisher communication Finisher-N1/Saddle Finisher-N2
There is a fault in data communication. The communication between the machine and the finisher remains disrupted for 5 sec or more.

Code: E500

Description: There is a fault in finisher communication. Finisher-M1
There is a fault in data communication. The communication between the machine and the finisher is disrupted and, in addition, an attempt at recovery within 5 sec fails.

Code: E503-0002

Description: There is a fault in saddle communication. Finisher-N1/Saddle Finisher-N2
There is a fault in data communication. The communication between the saddle stitcher controller PCB and the finisher controller PCB remains disrupted for 5 sec or more.

Code: E504-0001

Description: There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2
The height sensor (PS1) is faulty. The communication between the height sensor and the finisher controller PCB is prevented. Or, there is a fault in the communication data.

Code: E504-0002

Description: There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2
The height sensor (PS1) is faulty. The communication between the height sensor and the finisher controller PCB is prevented for 0.1 sec or more.

Code: E504-0003

Description: There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2
The connector of the height sensor (PS1) is faulty. This fault is detected at power-on.

Code: E504-0004

Description: There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2
The DIP switch for the height sensor (PS1) is not adjusted correctly. There is a fault in the adjustment of the sensor by the DIP switch.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie