Description: EEPROM error (optical unit). When the printer is not put in a ready status if the predetermined time has elapsed after execution of access control to the EEPROM of the P/H Assy at power-on.
Causes: • P/H Assy • Control Board (PWB-A)
Remedy: 1 Check the P/H Assy connector connection status, and correct if it is improper. 2 Replace the P/H Assy. 3 Replace the PWB-A.
Description: Color matching LSI error (R/W error). When a read or write error is detected at access to the Color Matching LSI.
Causes: • Correction Board • Control Board (PWB-A)
Remedy: 1 Check the Correction Board connection status, and correct if it is improper. ¯ ¯ ¯ 2 Replace the Correction Board. ¯ ¯ ¯ 3 Replace the PWB-A.
Description: Pick Motor error. When the fire check detection signal is detected as High during motor rotation.
Causes: • Paper Loading Drive Motor (M1) • PF Drive Motor (M2) • Duplex Unit Drive Motor (M10) • Duplex Feeding Unit Motor (M11) • Fuser Drive Motor (M3) • Manual Feed Detection Board (PWB-Y) • Duplex Unit Control Board (PWB-X) • Control Board (PWB-A)
Remedy: 1 Check the motor connector connection status, and correct if it is improper. 2 Check the motor drive coupling status, and correct if it is improper. 3 Check the operation of M1. p115 PWB-A CNSTM-A-5~8 (Pulse) 14-B 4 Replace the PWB-A.
Description: Register Motor error. When the fire check detection signal is detected as High during motor rotation.
Causes: • Paper Loading Drive Motor (M1) • PF Drive Motor (M2) • Duplex Unit Drive Motor (M10) • Duplex Feeding Unit Motor (M11) • Fuser Drive Motor (M3) • Manual Feed Detection Board (PWB-Y) • Duplex Unit Control Board (PWB-X) • Control Board (PWB-A)
Remedy: 1 Check the motor connector connection status, and correct if it is improper. 2 Check the motor drive coupling status, and correct if it is improper. 3 Check the operation of M2. p115 PWB-A CNSTM-A-1~4 (Pulse) 12-A 4 Replace the PWB-A.
Description: Duplex Motor error. When the fire check detection signal is detected as Low during motor rotation.
Causes: • Paper Loading Drive Motor (M1) • PF Drive Motor (M2) • Duplex Unit Drive Motor (M10) • Duplex Feeding Unit Motor (M11) • Fuser Drive Motor (M3) • Manual Feed Detection Board (PWB-Y) • Duplex Unit Control Board (PWB-X) • Control Board (PWB-A)
Remedy: 1 Check the motor connector connection status, and correct if it is improper. 2 Check the motor drive coupling status, and correct if it is improper. 3 Check the operation of M10. p115 PWB-X PJ2-X-1~4 (Pulse) 22-H 4 Replace the PWB-X. 5 Replace the PWB-A.
Description: Duplex Feeding Unit Motor error. When the fire check detection signal is detected as Low during motor rotation.
Causes: • Paper Loading Drive Motor (M1) • PF Drive Motor (M2) • Duplex Unit Drive Motor (M10) • Duplex Feeding Unit Motor (M11) • Fuser Drive Motor (M3) • Manual Feed Detection Board (PWB-Y) • Duplex Unit Control Board (PWB-X) • Control Board (PWB-A)
Remedy: 1 Check the motor connector connection status, and correct if it is improper. 2 Check the motor drive coupling status, and correct if it is improper. 3 Check the operation of M11. p115 PWB-Y PJ2-Y-1~4 (Pulse) 22-F 4 Replace the PWB-Y. 5 Replace the PWB-A.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.