• Code: 00,010,015
• Display: SERVICE CALL 00,010,015: INK SURFACE SENSOR (K) OVERFLOW
• Description: Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition).
• Remedy: • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger

• Code: 00,010,016
• Display: SERVICE CALL 00,010,016: INK SURFACE SENSOR (C) OVERFLOW
• Description: Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition).
• Remedy: • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger

• Code: 00,010,017
• Display: SERVICE CALL 00,010,017: INK SURFACE SENSOR (M) OVERFLOW
• Description: Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition).
• Remedy: • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger

• Code: 00,010,018
• Display: SERVICE CALL 00,010,018: INK SURFACE SENSOR (LC) OVERFLOW
• Description: Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition).
• Remedy: • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger

• Code: 00,010,019
• Display: SERVICE CALL 00,010,019: INK SURFACE SENSOR (LM) OVERFLOW
• Description: Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition).
• Remedy: • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger

• Code: 00000100
• Display: SERVICE CALL 00000100:Waste ink tank full
• Description: The waste ink pads are completely full, causing a fatal error. The printer stops printing.
• Remedy: It is similar as "Maintenance call 0100".

• Code: 00000101
• Display: SERVICE CALL 00000101: CR motor life (Even Ink tube life)
• Description: The carriage drive system reached the life.
• Remedy: The following confirmation and also part exchange and CR motor initialization • Whether there is not ink leakage from the ink supply tube and also coupling department, is confirmed. • It confirms whether there are not dirt and abrasion in the slowing-down gear that was attached to the CR timing belt, PF roller axis. • The CR timing belt tension confirms whether or not it is normal. • Exchange the CR motor and ink tube. After the above part are exchanged, "CR motor Initialization" of maintenance mode 2 is run.

• Code: 00000102
• Display: SERVICE CALL 00000102 :Waste ink box on the right side full
• Description: It is ’00,000,100’ and time in the detailed that displayed it to the LCD panel and be not fatal error.
• Remedy: Not necessary ("Waste ink Initialization" of maintenance mode 2 is run.)