Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson Stylus Pro 4910 — Trang 9/18

Code: 1551

Description: Paper Thickness Sensor error
Causes: 1. During detection of paper thickness, the thickness cannot be determined because the sensor is not stable due to vibration or the like. 2. The Paper Thickness Sensor is damaged and cannot detect the paper thickness correctly.
Remedy: Replace the Paper Thickness Sensor.

Code: 155A

Description: DCP Motor overload error
Causes: The electric current flowing when driving the motor is irregularly large. • Decompression Pump cable is damaged. • Irregular load • Decompression Pump encoder failure • Decompression Pump failure
Remedy: Replace the Decompression Pump.

Code: 155B

Description: DCP Motor over speed error
Causes: Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Decompression Pump encoder failure • SUB Board is damaged. • Decompression Pump driver failure
Remedy: 1. Replace the Decompression Pump. 2. Replace the SUB-B Board. 3. Replace the Main Board.

Code: 155C

Description: DCP Motor reversing error
Causes: Detects accumulatively more than the specified number of times that it is being driven in the opposite direction to the specified driving direction. • The polarity of Decompression Pump Assy cable is opposite. • Decompression Pump Assy encoder failure
Remedy: Replace the Decompression Pump.

Code: 155D

Description: DCP Motor driving time-out error
Causes: Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control.
Remedy: Replace the Main Board.

Code: 155E

Description: DCP Motor velocity deviation error
Causes: Detects, when accelerating/decelerating the motor, that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Decompression Pump Assy encoder failure • Decompression Pump failure • SUB Board is damaged. • Decompression Pump driver failure
Remedy: 1. Replace the Decompression Pump. 2. Replace the SUB-B Board. 3. Replace the Main Board.

Code: 155F

Description: DCP Motor lock error
Causes: 1. Connection failure of the Decompression Pump Assy. 2. Detects that it is being driven at an irregularly slower speed than the specified value. • Irregular load • Decompression Pump Assy encoder failure • Decompression Pump failure
Remedy: Replace the Decompression Pump.

Code: 1561

Description: Paper thickness at power-on error
Causes: At power-on, the paper thickness sensor detects more than 2.2 mm paper thickness.
Remedy: Replace the Paper Thickness Sensor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie