Code :

Code: 1581
Description: Paper eject position error
Causes: When paper eject position is shifting, it cannot be shifted properly or this operation itself cannot be detected (Release => low load star wheels => high load star wheels). • Foreign object is stuck. • Connection error of the Eject Star Wheels Position Sensor • Eject Star Wheels Position Sensor failure • Edge Release Assy encoder failure • Edge Release Assy failure
Remedy: 1. Replace the Eject Star Wheels Position Sensor. 2. Replace the Edge Release Assy.

Code: 1582
Description: ASF Edge Guide open/close error
Causes: ASF Edge Guide is not operating. The operation of the ASF Edge Guide is not detected. • Connection failure of the EG Sensor. • EG Sensor failure • Edge Release Assy encoder failure • Edge Release Assy failure
Remedy: 1. Replace the Edge Sensor. 2. Replace the Edge Release Assy.

Code: 158A
Description: EG Motor overload error
Causes: The electric current flowing when driving the motor is irregularly large. • Irregular load • Edge Release Assy cable is damaged. • Edge Release Assy encoder failure • Edge Release Assy failure
Remedy: Replace the Edge Release Assy.

Code: 158B
Description: EG Motor over speed error
Causes: Detects, when accelerating/decelerating the motor, that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Edge Release Assy encoder failure • Edge Release Assy failure • SUB Board is damaged. • Edge Release Assy driver failure
Remedy: 1. Replace the Edge Release Assy. 2. Replace the SUB-B Board. 3. Replace the Main Board.

Code: 158C
Description: EG Motor reversing error
Causes: Detects accumulatively more than the specified number of times that it is being driven in the opposite direction to the specified driving direction. • The polarity of Edge Release Assy cable is opposite. • Edge Release Assy encoder failure
Remedy: Replace the Edge Release Assy.

Code: 158D
Description: EG Motor driving time-out error
Causes: Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control.
Remedy: Replace the Main Board.

Code: 158E
Description: EG Motor velocity deviation error
Causes: Detects, when accelerating/decelerating the motor, that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Edge Release Assy encoder failure • Edge Release Assy failure • SUB Board is damaged. • Edge Release Assy driver failure
Remedy: 1. Replace the Edge Release Assy. 2. Replace the SUB-B Board. 3. Replace the Main Board.

Code: 158F
Description: EG Motor lock error
Causes: 1. Connection failure of the Edge Release Assy. 2. Detects that it is being driven at an irregularly slower speed than the specified value. • Irregular load • Edge Release Assy encoder failure • Edge Release Assy failure
Remedy: Replace the Edge Release Assy.