Danh mục sản phẩm

Code :

Code: 30.01.23
Display: 30.01.23 Scanner failure
Description: A scanner calibration error has occurred.
Remedy: 1. Turn the product off and then on. 2. Replace the scanner.

Code: 30.01.25
Display: 30.01.25 Scanner failure
Description: The scanner-control board (SCB) cannot communicate with the product.
Remedy: 1. Turn the product off and then on. 2. Check the SCB LED. 3. Verify that the SCB connections are correct. 4. Verify the cable from the scanner to the formatter is not plugged in backwards. 5. Replace the SCB

Code: 30.01.36
Display: 30.01.36 Scanner failure
Description: An error occurred during the SCB firmware upgrade.
Remedy: 1. Turn the product off and then on. 2. Resend the firmware upgrade. 3. Replace the SCB.

Code: 30.01.39
Display: 30.01.39 Scanner failure
Description: There was an AFE1 (analog front-end) failure.
Remedy: 1. Turn the product off and then on. 2. Replace the scanner

Code: 30.01.4
Display: 30.01.41 Scanner failure
Description: There was a SCB error.
Remedy: 1. Turn the product off and then on. 2. Replace the SCB

Code: 30.01.40
Display: 30.01.40 Scanner failure
Description: The scanner AFE 2 failed.
Remedy: 1. Turn the product off and then on. 2. Replace the scanner

Code: 30.01.42
Display: 30.01.42 Scanner failure
Description: The PCI-E (peripheral component interconnect express) cable is faulty or disconnected.
Remedy: 1. Turn the product off and then on. 2. Check the PCI-E cable connections at the SCB and the ICB. 3. Replace the PCI-E cable

Code: 30.01.43
Display: 30.01.43 Scanner failure
Description: The SCB memory has failed.
Remedy: 1. Turn the product off and then on. 2. Replace the SCB

< 1 2 3 4 5 6 7 > Last ›

0