• Code: 01.0:03
• Description: Error impact I2C channel.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Gamut PCI PCA.

• Code: 01.0:10
• Description: Problem with the Gamut PCI PCA.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the Gamut PCI PCA. • If the System Error continues, replace the Main PCA. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

• Code: 01.1:10
• Description: Problem with the PrintMech PCA.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the PrintMech PCA and the Gamut PCI PCA are not damaged and are correctly connected. • Replace the PrintMech PCA. • If the System Error continues, replace the Gamut PCI PCA. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

• Code: 01.2:10
• Description: ISS PCA faulty - Humidity sensor out of scale or NVM backup failure.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Ink Supply Tubes and Trailing Cable.

• Code: 02.1:10
• Description: Problem with the Carriage PCA.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable is not damaged. • Check that the Trailing Cable is correctly connected to the Carriage PCA, Interconnect PCA and to the Gamut PCI PCA. • Replace the Carriage PCA. • If the System Error continues, replace the Gamut PCI PCA. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

• Code: 02:10
• Description: Encoder seems to be wrong.
• Remedy: • Check that the Carriage Stopper is correctly installed (Refer to Carriage Disassembly Instructions, Step 16.). • Replace the Carriage Assembly. • If the System Error continues, replace the Encoder Strip and Encoder Sensor. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

• Code: 03:10
• Description: Problem with the Power Supply Unit.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Perform the Electronics Modules Test to troubleshoot the problem further. • If the System Error continues, replace the Power Supply Unit.

• Code: 05.1:10
• Description: CPU Fan is stopped or burnt.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the CPU Fan. • If the System Error continues, replace the Main PCA. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.