• Code: 29.3:01
• Description: Printhead Cleaner not inserted correctly in slot 4.
• Remedy: • Open the Printhead Cleaner Access Door and check that the Magenta Printhead Cleaner is correctly seated in slot 4 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Magenta Printhead Cleaner in slot 4 of the Service Station.

• Code: 29.4:01
• Description: Printhead Cleaner not inserted correctly in slot 5.
• Remedy: • Open the Printhead Cleaner Access Door and check that the Black Printhead Cleaner is correctly seated in slot 5 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Black Printhead Cleaner in slot 5 of the Service Station.

• Code: 29.5:01
• Description: Printhead Cleaner not inserted correctly in slot 6.
• Remedy: • Open the Printhead Cleaner Access Door and check that the Black Printhead Cleaner is correctly seated in slot 6 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Black Printhead Cleaner in slot 6 of the Service Station.

• Code: 29.6:01
• Description: Printhead Cleaner not inserted correctly in slot 7.
• Remedy: • Open the Printhead Cleaner Access Door and check that the Cyan Printhead Cleaner is correctly seated in slot 7 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Cyan Printhead Cleaner in slot 7 of the Service Station.

• Code: 29.7:01
• Description: Printhead Cleaner not inserted correctly in slot 8.
• Remedy: • Open the Printhead Cleaner Access Door and check that the Cyan Printhead Cleaner is correctly seated in slot 8 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Cyan Printhead Cleaner in slot 8 of the Service Station.

• Code: 41:03
• Description: Electrical current limit in Media-Axis Motor.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Open the Window and check for any visible obstacles restricting the movement of the Drive Roller. If there is a wrinkled mass of media inside the paper path, lift the Pinchwheels (using the Media Lever) and clear the obstruction. • Replace the Media-Axis Motor. • If the System Error continues, replace the PrintMech PCA.

• Code: 41:10
• Description: Electrical fault in Media-Axis Motor.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Media-Axis Motor cable is not damaged and is correctly connected to the PrintMech PCA. • Replace the Media-Axis Motor. • If the System Error continues, replace the PrintMech PCA.

• Code: 42:03
• Description: Electrical current limit in Scan-Axis Motor.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Open the Window and check for any visible obstacles restricting the movement of the Carriage Assembly. If there is a wrinkled mass of media blocking the Carriage Assembly, then clear the obstruction. • Replace the Scan-Axis Motor. • If the System Error continues, replace the PrintMech PCA.