Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Service Station.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Make sure that the Service Station path is clear. Remove any visible obstacles (e.g. screws, plastic parts, etc...) restricting the movement of the Service Station. • If the System Error continues, replace the Service Station.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the APS cable is not damaged and is correctly connected to the PrintMech PCA. • Replace the APS Assembly. • Replace the PrintMech PCA. • If the System Error continues, replace the Gamut PCI PCA. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Try purging the Ink Supply Tubes again once the Printer has been rebooted. • Install new Ink Cartridges in to the Printer and try purging the Printer again.
Description: Broken bag detected in Ink Cartridge.
Remedy: • Remove the Ink Cartridges and check for ink leakage in the ISS area. • Perform the "Bag Broken Recovery" Diagnostic to further troubleshoot the error code.
Description: Bad contact detected in ISS slot0 floater.
Remedy: • Remove the Yellow Ink Cartridge and reinstall it in to the Printer. • Replace the Yellow Ink Cartridge. • Check that the ISS to Cartridge cable (Yellow Ink Cartridge) is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable (Yellow Ink Cartridge). • Replace the Ink Supply Tubes and Trailing Cable.
Description: Bad contact detected in ISS slot1 floater.
Remedy: • Remove the Magenta Ink Cartridge and reinstall it in to the Printer. • Replace the Magenta Ink Cartridge. • Check that the ISS to Cartridge cable (Magenta Ink Cartridge) is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable (Magenta Ink Cartridge). • Replace the Ink Supply Tubes and Trailing Cable.
Description: Bad contact detected in ISS slot2 floater.
Remedy: • Remove the Black Ink Cartridge and reinstall it in to the Printer. • Replace the Black Ink Cartridge. • Check that the ISS to Cartridge cable (Black Ink Cartridge) is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable (Black Ink Cartridge). • Replace the Ink Supply Tubes and Trailing Cable.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.