Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 4000 — Trang 9/11

Code: 72:04

Description: Generic Firmware error.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

Code: 73:03

Description: Servo Error.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Perform the "Scan-Axis" Diagnostic to further troubleshoot the error code. • If the System Error continues, perform the "Media Drive" Diagnostic to further troubleshoot the error code.

Code: 74:00

Description: Failed getting Part Number/Serial Number.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

Code: 74:01

Description: Error uploading firmware update file.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Resend the firmware update file to the Printer.

Code: 74:04

Description: Old Vacuum Fan detected - upgrade the Firmware.
Remedy: • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

Code: 76:03

Description: Out of Disk space - Data was lost.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Resend the file to the Printer. • If the System Error continues, it is recommended that you remove any unnecessary files from the Hard Disk Drive using the Web Server. • Perform an EEROM Reset and resend the file to the Printer.

Code: 77:04

Description: Embedded Web Server internal software error.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

Code: 79.1:04

Description: CDS server lost connection with client.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie