Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 5000

Code: 010023

Description: EEROM Test failure.
Remedy: • Replace the Main PCA  NOTE After replacing the Main PCA, make sure you perform the Backup EEROM , making sure that you select "Main PCA" when prompted.

Code: 01002D

Description: The Main PCA cannot communicate with the Carriage.
Remedy: • Check the Trailing Cable is connected correctly. • Replace the Trailing Cable  • Replace the Carriage Assembly 

Code: 010040

Description: Error in Paper-axis Encoder quadrature.
Remedy: • Check that the Paper-Axis Motor cable is NOT broken or damaged. • Check that the Paper-Axis Motor cable is correctly connected. • Replace the Paper-Axis Motor  • If the Error Code continues, replace the the Main PCA Ë Page 8- 77. WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 010041

Description: Error in Scan-axis Encoder quadrature.
Remedy: • Check that the Encoder Strip is NOT broken or damaged. • Replace the Encoder Strip  • Replace the Carriage Assembly  • If the Error Code continues, replace the Main PCA  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 010042

Description: Error in Service Station-axis Encoder quadrature.
Remedy: • Check that the Service Station Encoder-Cable is NOT broken or damaged. • Check that the Service Station Encoder-Cable is correctly connected. • Replace the Service Station  • If the Error Code continues, replace the Main PCA  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 010090

Description: Error in Paper-axis Motor Encoder
Remedy: • Check that the Paper-Axis Motor cable is NOT broken or damaged. • Check that the Paper-Axis Motor cable is correctly connected. • Replace the Paper-Axis Motor  • If the Error Code continues, replace the Main PCA  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 010091

Description: Error in Paper-axis Motor Encoder
Remedy: • Check that the Paper-Axis Motor cable is NOT broken or damaged. • Check that the Paper-Axis Motor cable is correctly connected. • Replace the Paper-Axis Motor  • If the Error Code continues, replace the Main PCA  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 010092

Description: Mark Encoder position not detected on Drive Roller.
Remedy: • Replace the Lens Cover  • Clean the Mark Encoder on the Drive Roller using the Turn DRIVE ROLLER Utility 
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie