Code :

Code: 0B0005
Description: APS Failure.
Remedy: • Check that the cable from the Ink Supply Station (ISS) PCA to the Ink Supply Station is correctly connected. • Faulty APS. Replace the APS • If the error code continues, replace the Main PCA WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 0B0006
Description: The Trailing Cable has been incorrectly connected.
Remedy: • Power the Printer OFF disconnect the Trailing Cable. Replace the Trailing Cable if the ends are not flat or are damaged. Reconnect the Trailing Cable correctly, making sure it is pushed in firmly (refer to the instructions on page ). Power ON the Printer and check if the Error Code has disappeared. • If the Error Code continues, replace the Main PCA taking care when connecting the Trailing Cable.

Code: 0B0007
Description: Unable to detect Vacuum Fan.
Remedy: • Make sure that the Vacuum Fan is connected correctly to the Main PCA. • Turn the Printer OFF and disconnect the Vacuum Fan from the Main PCA. Connect a New Vacuum Fan to the Main PCA and power ON the Printer. If the New Vacuum Fan functions correctly without any Error Codes then remove the Old Vacuum Fan from the Printer and install the New one. • If the New Vacuum Fan does not function correctly either, then replace the Main PCA

Code: 0B0008
Description: Unable to detect Cooling Fan.
Remedy: • Make sure that both Cooling Fans are correctly connected to the Power Supply Unit. • Replace the Main PCA

Code: 0B0009
Description: Unable to detect Aerosol Fan (in the Right Cover).
Remedy: • Make sure that the Aerosol Fan is connected correctly to the Main PCA. • Turn the Printer OFF and disconnect the Aerosol Fan from the Main PCA. Connect a New Aerosol Fan (comes with the new Right Cover) to the Main PCA and power ON the Printer. If the New Aerosol Fan functions correctly without any Error Codes then remove the Old Aerosol Fan from the Printer and install the New one. • If the New Aerosol Fan does not function correctly either, then replace the Main PCA

Code: 0B000A
Description: Primer Shutdown Error.
Remedy: • Check that the Primer Stepper-Motor Cable is NOT broken or damaged and that the Primer Arm moves freely from side to side. • Replace the Service Station • If the Error Code continues, replace the Main PCA WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 0B000B
Description: APS Failure.
Remedy: • Check that the cable from the Ink Supply Station (ISS) PCA to the Ink Supply Station is correctly connected. • Check that the Air Pressurization System Sensor Cable is correctly connected and is NOT damaged. • Check all the tubes of the APS and make sure they are NOT pinched or damaged. • Faulty APS. Replace the APS • If the error code continues, replace the Main PCA WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

< 1 2 3 4 5 >