Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 5000 — Trang 2/5

Code: 011000

Description: NIB Crash.
Remedy: Power the Printer OFF and ON again using the Power Switch at the back of the Printer.

Code: 050000

Description: Lens has problems reading the Mark Encoder on the Drive Roller.
Remedy: • Clean the Mark Encoder on the Drive Roller using the Turn DRIVE ROLLER Utility  • Replace the Lens Cover Assembly 

Code: 050001

Description: Lens has problems reading the Mark Encoder on the Drive Roller.
Remedy: • Clean the Mark Encoder on the Drive Roller using the Turn DRIVE ROLLER Utility  • Replace the Lens Cover Assembly 

Code: 06030C

Description: Bad Line Sensor.
Remedy: • Replace the Carriage Assembly  • Replace the Trailing Cable  • Replace the Main PCA  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 0A0000

Description: APS Failure.
Remedy: • Check all the cables of the APS and make sure they are correctly connected and are NOT damaged. • Check all the tubes of the APS and Tubes System and make sure they are correctly connected and are NOT pinched or damaged. • Check that the Air Tube from the APS is correctly connected to the Tubes System. • Replace ONE Ink Cartridge at a time, checking if the System Error Code disappears. • Faulty APS. Replace the APS  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 0A0010

Description: APS Failure.
Remedy: • Check all the cables of the APS and make sure they are correctly connected and are NOT damaged. • Check all the tubes of the APS and Tubes System and make sure they are correctly connected and are NOT pinched or damaged. • Check that the Air Tube from the APS is correctly connected to the Tubes System. • Replace ONE Ink Cartridge at a time, checking if the System Error Code disappears. • Faulty APS. Replace the APS  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 0A0030

Description: Problem in Depressurizing Air System.
Remedy: • Check the APS for any signs of Ink. Also inspect ALL Ink Cartridges for any signs of leaking (the bottom valve of the Ink Cartridge will contain ink). • If there is ink leakage, replace ALL Ink Cartridges, the APS and the Tubes System. WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 0A0040

Description: APS Failure.
Remedy: • Check all the cables of the APS and make sure they are correctly connected and are NOT damaged. • Check all the tubes of the APS and Tubes System and make sure they are correctly connected and are NOT pinched or damaged. • Replace ONE Ink Cartridge at a time, checking if the System Error Code disappears. • Faulty APS. Replace the complete APS  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie