Mã lỗi HP DesignJet T7100 — Trang 10/18
Description:
Causes: Stacker motor encoder failure
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.
Description:
Causes: Stacker power supply failure
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.
Description:
Causes: Paper jam detected in stacker; paper jam sensor activated
Remedy: • Open stacker window and remove paper. • If problem persists, contact the stacker manufacturer.
Description:
Causes: Paper jam detected in stacker; paper jam sensor not activated
Remedy: • Open stacker window and remove paper. • If problem persists, contact the stacker manufacturer.
Description:
Causes: Stacker communication protocol error
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.
Description:
Causes: Unable to load roll 1 from standby/parking position; roll mispositioned
Remedy: Roll 1 has been unloaded. Reload it and check that the paper is correctly aligned with the hubs.
Description:
Causes: Unable to load roll 1 from standby/parking position; paper edges were not found
Remedy: Roll 1 has been unloaded. Reload it.
Description:
Causes: Unable to load roll 2 from standby/parking position; roll mispositioned
Remedy: Roll 2 has been unloaded. Reload it and check that the paper is correctly aligned with the hubs.