Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet T7100 — Trang 11/18

Code: 39.2:01.2

Description:
Causes: Unable to load roll 3 from standby/parking position; roll mispositioned
Remedy: Roll 3 has been unloaded. Reload it and check that the paper is correctly aligned with the hubs.

Code: 39.2:01.3

Description:
Causes: Unable to load roll 2 from standby/parking position; paper edges were not found
Remedy: Roll 2 has been unloaded. Reload it.

Code: 39.2:01.3

Description:
Causes: Unable to load roll 3 from standby/parking position; paper edges were not found
Remedy: Roll 3 has been unloaded. Reload it.

Code: 40:03

Description:
Causes: Smart Roll-loading System Motor shutdown
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Open the Smart Roll-loading System and check for any visible obstacles restricting its movement. • Replace the Smart Roll-loading System Gear and Motor

Code: 41:03

Description: Media-Axis Motor
Causes: Paper motor electrical current limit
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Open the Window and check for any visible obstacles restricting the movement of the Drive Roller. If there is a wrinkled mass of paper inside the paper path, lift the Pinchwheels (using the Media Lever) and clear the obstruction. • Replace the Media-Axis Motor

Code: 42:03

Description: Scan-Axis Motor
Causes: Scan-Axis motor electrical current limit
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Open the Window and check for any visible obstacles restricting the movement of the Carriage Assembly. If there is a wrinkled mass of paper blocking the Carriage Assembly, then clear the obstruction. • Clean the Encoder Strip Clean the Encoder Strip. • Replace the Scan-Axis Motor

Code: 43.1:10

Description: Vacuum Fan
Causes: Vacuum Driver PCA communication or hardware failure
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • If the system error persists, replace the Vacuum Fan

Code: 43:01

Description: Vacuum Fan
Causes: Vacuum Fan spinning at wrong speed
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • If the system error persists, replace the Vacuum Fan
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie