Code :

Code: 50.2:10
Description: OMAS
Causes: OMAS Controller Card communication failure
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Check that the printer has the latest firmware version. If not, update the firmware to the latest version. • Replace the OMAS Controller Card

Code: 50.3:11
Description: OMAS
Causes: Main PCA to OMAS Controller cable does not seem to be connected
Remedy: • Check that the Main PCA to OMAS Controller cable is not damaged. • Check that the Main PCA to OMAS Controller cable is correctly connected to the Main PCA and the OMAS Controller Card.

Code: 50:03
Description: OMAS
Causes: OMAS fatal error or disconnected
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Check that the Power Supply to OMAS Controller cable is not damaged and is correctly connected to the PSU and the OMAS Controller Card. • Replace the OMAS Controller Card

Code: 50:14
Description: OMAS
Causes: Firmware version mismatch between the OMAS Controller Card and Hard Disk Drive
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Check that the printer has the latest firmware version. If not, update the firmware to the latest version. • Replace the OMAS Controller Card

Code: 51.1:10
Description: Maintenance Cartridge Door Sensor
Causes: Error detected in the Maintenance Cartridge Door Sensor (Service Station Door Sensor)
Remedy: • Check that the Maintenance Cartridge Door Sensor cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Service Station Cable, which includes the Maintenance Cartridge Door Sensor

Code: 51.9:10
Description:
Causes: Smart Roll-loading System Door Sensor error detected
Remedy: • Check that the Left and Right Smart Roll-loading System Door Sensor cables are not damaged and are connected correctly to the Interconnect PCA. • Replace the Smart Roll-loading System Door Switch

Code: 51:10
Description: Window Position Sensor
Causes: Error detected in the Window Position Sensor
Remedy: • Check that the Window Position Sensor cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Window Position Sensor

Code: 52:10
Description: Drop Detector
Causes: Drop Detector switch On/Off failure
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Check that the Drop Detector cable is not damaged and is correctly connected to the Service Station cable. • Check that the Service Station cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Drop Detector