Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet Enterprise 500 Color M551 — Trang 31/44

Code: 47.FC.31

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
Drum Speed Adjustment Store image failure
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 47.FC.32

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
Drum Speed Adjustment Image not found
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 47.FC.33

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
Drum Speed Adjustment Print engine execution failure
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 47.FC.40

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
Pulse Width Modulation Image not found at system initializatione
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 47.FC.41

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
Pulse Width Modulation Store image failure
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 47.FC.42

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
Pulse Width Modulation Image not found
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 47.FC.430

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
Pulse Width Modulation Print engine execution failure
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 49.XX.YY

Display: 49.XX.YY To continue, turn off then on
Description: A firmware error has occurred.
Remedy: 1. Turn the product off, and then on. 2. If the error returns, check the following: The error might be caused by a network connectivity problem. Damaged interface cable Damaged USB port Invalid network configuration setting The error might be caused by the print job. Invalid print driver problem with the software application Problem with the file 3. If the error persists, perform a firmware upgrade.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie