Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M4345 MFP — Trang 4/22

Code: -

Display: Load Tray 1 <type> <size>
Description: The tray is empty or configured for a different size than the size requested.
Remedy: 1. Make sure that the tray is loaded with the media type and size that is indicated. 2. Replace the tray 1 sensor lever (PS105). 3. Replace the DC controller PCA.

Code: -

Display: Manually feed <type> <size>
Description: The specified job requires manual feed from tray 1.
Remedy: Load the requested media into tray 1. To override the message, touch OK to use a type and size of media that is available in another tray.

Code: -

Display: Manually feed output stack Then touch OK to print second sides
Description: The first side of a manual duplex job has printed and the MFP is waiting for a user to insert the output stack to complete the second side.
Remedy: Insert the printed stack in the input tray, and then touch OK.

Code: -

Display: Moving solenoid To exit press STOP
Description: This message appears during a component test when the component that is moving is a solenoid.
Remedy: Touch Stop to exit the test. This problem affects printing, so some scan functions might still be available.

Code: -

Display: Non HP supply installed Economode disabled
Description: A non-HP supply or a refilled HP supply has been installed.
Remedy: Follow the instructions in the onscreen dialog box. If you are certain that the print cartridge is a genuine HP print cartridge, make sure that connector J97 on the DC controller PCA is connected. If the problem persists, replace the DC controller PCA.

Code: -

Display: Order Black Cartridge
Description: The number of pages remaining for the print cartridge has reached the low threshold. The MFP was set to stop printing when a supply needs to be ordered.
Remedy: Touch OK to continue printing until the print cartridge is out of toner. 1. Install a new print cartridge. 2. If this message appears after you install a new print cartridge, the new print cartridge might be defective. Install a different cartridge. 3. Replace the DC controller PCA. 4. Replace the engine power-supply PCA.

Code: -

Display: Order document feeder kit
Description: This warning message appears one month before the end of life when the maintenance interval has been reached. Printing can continue.
Remedy: message, touch OK to return to the Home screen. Then scroll to and touch Resets. Then touch Clear Document Feeder Message.

Code: -

Display: Order maintenance kit
Description: This warning message appears one month before the end of life when the maintenance interval has been reached. Printing can continue.
Remedy: Order a maintenance kit. To clear the message, touch OK to return to the Home screen. Then scroll to and touch Resets. Then touch Clear Maintenance Message.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie