Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M4345 MFP — Trang 7/22

Code: -

Display: Unable to mopy job
Description: A mopy job cannot be mopied because of a memory, disk, or configuration problem.
Remedy:

Code: -

Display: UNABLE TO SEND
Description:
Remedy: To temporarily hide this message in order to fax or send to e-mail, touch IGNORE.

Code: -

Display: Unable to send Fax. Please check fax configuration.
Description: The MFP was unable to send the fax.
Remedy: For complete information about solving fax problems, see the HP LaserJet Analog Fax 300 User Guide.

Code: -

Display: Unable to store job
Description: A job cannot be stored because of a memory, disk, or configuration problem.
Remedy:

Code: -

Display: USB accessory error
Description: Power requirements for a USB accessory attached to the MFP are beyond supported limits.
Remedy: Detach the USB accessory, and then turn the MFP off then on. Try a similar accessory that has its own power supply or requires less power.

Code: -

Display: USB storage <X> not functional
Description: A parameter in a USB storage accessory is not working properly.
Remedy: Turn the MFP off. Disconnect the USB storage accessory and replace it with a new USB storage accessory. Turn the MFP on.

Code: -

Display: USB storage <X> removeds
Description: A USB storage accessory has been disconnected since the MFP was turned on.
Remedy: To continue using the USB accessory, turn off the MFP and connect the accessory again. Otherwise, turn the MFP off then on to clear the message.

Code: -

Display: User name or password is incorrect. Please re-enter.
Description: The user name or password was typed incorrectly.
Remedy: Retype the user name and password.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie