Description: A sensor error has occurred.
Primary laser/scanner beam detect abnormality
Remedy: 1. Turn the product off, and then on. 2. If the product has had parts removed or replace, check the connector (J86) on the DC controller PCA. 3. If the error persists, replace the laser/scanner assembly.
Display: 56.00.YY Error To continue turn off then on
Description: Optional paper trays communication error
Remedy: Turn the product off, and then on. If the error persists, reseat the optional paper trays (1 x 500-sheet feeder and/or 3 x 500-sheet feeder). Check the input connectors for damage. If a connector is damaged, replace the connector.
Display: 57.00.0Y Error To continue turn off then on
Description: Fan error
Main fan (FM101) failure
Remedy: 1. Turn the product off, and then on. Listen for fan noise at the back corner of the product. If no noise is heard, replace the power supply fan (FM101). 2. If this part has been removed or replace, check the connector (J95) on the DC controller PCA and the connector (J64) on the low-voltage power supply assembly. 3. If the error persists, replace the main fan (FN101).
Display: 57.00.0Y Error To continue turn off then on
Description: Fan error
Laser/scanner fan (FN102) failure
Remedy: 1. If this part has been removed or replace, check the connector (J75) on the DC controller PCA. 2. If the error persists, replace the laser/scanner fan (FN102).
Display: 57.00.0Y Error To continue turn off then on
Description: Fan error
Cartridge fan (FM301) failure
Remedy: 1. If this part has been removed or replace, check the connector (J95) on the DC controller PCA. 2. Check the connector (J66) on the engine power supply PCA. 3. If the error persists, replace the cartridge fan (FM301).
Display: 57.00.0Y Error To continue turn off then on
Description: Fan error
Cartridge front-side fan (FM103) failure
Remedy: 1. Turn the product off, and then on. Listen for fan noise at the middle back of the product. If no noise is heard, replace the cartridge front-side fan (FM103). 2. If this part has been removed or replace, check the connector (J79) on the DC controller PCA. 3. If the error persists, replace the cartridge front-side fan (FM103).
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.