Description: Air Curtain and Printzone Heaters Control PCA with no voltage detected
Causes: Main PSU to Air Curtain and Printzone Heaters Control PCA.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Reseat/Replace Main PSU to Air Curtain and Printzone Heaters Control PCA Cable. 2. Replace Air Curtain and Printzone Heaters Control PCA. 3. Replace Main PSU (very low probability).
Remedy: Call agent: • Switch the power off at the rear of the printer, wait briefly, then switch it back on again. Service engineer: • Replace Formatter. See Formatter PCA.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Use the Hard disk recovery in Diagnostic test. 3. Replace the Hard Disk Drive.
Description: Main NVM failure: not detected, read/write failed or readback error
Causes: Main NVM not detected, read/write failed or readback error.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Use the Hard disk recovery in Diagnostic test. 3. Replace the Hard Disk Drive.