• Code: 17.0X.69
• Description: Cartridge Very Low. The indicated cartridge is very low. • 17.00.69 - Black Cartridge • 17.01.69 - Cyan Cartridge • 17.02.69 - Magenta Cartridge • 17.03.69 - Yellow Cartridge
• Remedy: The target cartridge has been depleted and the only ink remaining is in the X chamber and print head. The cartridge can be replaced in this state without any loss of ink to the system. No action necessary.

• Code: 17.0X.70
• Description: Printing past very low. The indicated cartridge is printing past very low. • 17.00.70 - Black Cartridge • 17.01.70 - Cyan Cartridge • 17.02.70 - Magenta Cartridge • 17.03.70 - Yellow Cartridge
• Remedy: The print quality should not degrade in any way when the ink cartridge approaches end-of-life as the product will halt printing when all of the usable ink has been depleted. Customers should have a spare cartridge on-hand as the indicated cartridge will transition to Empty in just a few pages. If print quality is not acceptable replace the indicated cartridge.

• Code: 17.0X.80
• Description: Install Supply. The indicated cartridge is missing. • 17.00.80 - Black Cartridge • 17.01.80 - Cyan Cartridge • 17.02.80 - Magenta Cartridge • 17.03.80 - Yellow Cartridge
• Remedy: Install the indicated cartridge.

• Code: 17.31.60
• Description: Ink Collection Unit Warning. Ink Collection Unit almost full. The percentage of life remaining is 2%. The product’s Ink Collection Unit (ICU) collects unused ink for later disposal. The life tracking on this supply is accomplished via a numeric percent life remaining (PLR) that starts at 100% and decreases in 1% increments as pages are printed. The engine counts the number of ink droplet that go into the ICU and reports this information to the formatter as a percentage of life remaining. The expected life of the ICU is nominally 120,000 page but this will vary depending on printing patterns.
• Remedy: A new ICU should be ordered and printing can continue. NOTE: There is no sensor that indicates when the ICU has been replaced. For this reason the user will be asked near end of ICU life if the ICU has been replaced each time the left door closes or a power-on occurs.

• Code: 17.31.65
• Description: Install Supply Ink Collection Unit. The Ink Collection Unit (ICU) is not installed.
• Remedy: Install the ICU, make sure it is aligned and installed correctly. If message continues to appear, install a replacement ICU.

• Code: 17.31.69
• Description: Ink Collection Unit full. The Ink Collection Unit is full. This is the second warning that the ICU life is almost depleted. The percentage of life remaining is 1% or less. The products Ink Collection Unit (ICU) collects unused ink for later disposal. The life tracking on this supply is accomplished via a numeric percent life remaining (PLR) that starts at 100% and decreases in 1% increments as pages are printed. The engine counts the number of ink droplet that go into the ICU and reports this information to the formatter as a percentage of life remaining. The expected life of the ICU is nominally 120,000 page but this will vary depending on printing patterns.
• Remedy: Replace the ICU or continue printing until stop occurs.

• Code: 17.31.70
• Description: Ink Collection Printing past full. Ink Collection Unit (ICU) printing past full.
• Remedy: Replace the ICU. Replacement can occur at this point or the user can continue until halted.

• Code: 17.31.71
• Description: Reinstall Ink Collection Unit. The product has prompted the user to remove and reinstall the Ink Collection Unit (ICU) to maintain print quality.
• Remedy: Remove and reinstall ICU, make sure it is aligned and installed correctly.