Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 950 pro — Trang 30/35

Code: C-8001

Description: Although the main body sends out data according to the data retransmission request made by the DF, a retransmission request signal is received again.
Causes: Confirmation of the wiring harness and the connector DF control board (DFCB: DF) Overall control board (OACB: main body)

Code: C-8002

Description: When a checksum error or an SRGA reception error was detected while in the reception in serial communication, a signal was sent to make a request for sending data again. And when data is being received upon this request, a checksum error or an SRGA reception error is detected again.
Causes: Confirmation of the wiring harness and the connector DF control board (DFCB: DF) Overall control board (OACB: main body)

Code: C-8003

Description: When the main power switch (SW1) is ON, there is no response to the initial communication request from the main body to the DF even after a specified period of time elapses.
Causes: Confirmation of the wiring harness and the connector DF control board (DFCB)

Code: C-8201

Description: Tray up/down motor (M303) abnormality.
Causes: Confirmation of the wiring harness and the connector Confirmation of the original tray up/down drive parts Tray up/down motor (M303) DF control board (DFCB)

Code: C-8301

Description: Cooling fan (FM301) abnormality.
Causes: Confirmation of the wiring harness and the connector Cooling fan (FM301) DF control board (DFCB)

Code: C-8401

Description: Original registration sensor (PS306) abnormality.
Causes: Confirming the sensor operation Confirmation of the wiring harness and the connector Original registration sensor (PS306) DF control board (DFCB)

Code: C-8402

Description: Original conveyance sensor (PS308) abnormality.
Causes: Confirming the sensor operation Confirmation of the wiring harness and the connector Original conveyance sensor (PS308) DF control board (DFCB)

Code: C-8403

Description: Original reverse sensor (PS309) abnormality.
Causes: Confirming the sensor operation Confirmation of the wiring harness and the connector Original reverse sensor (PS309) DF control board (DFCB)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie