Danh mục sản phẩm

Code :

Code: C-A006
Description: While in the security ON, the unlock of the HDD/2 (HDD2) results in failure. (Due to the mismatch of the password)
Causes: Confirmation of the wiring harness and the connector HDD/2 (HDD2) IC board (ICB)

Code: C-A007
Description: While in the security ON, an unlocked HDD is connected.
Causes: Confirmation of the wiring harness and the connector HDD/2 (HDD2) IC board (ICB)

Code: C-A008
Description: An unformatted HDD/2 (HDD2) is detected.
Causes: Confirmation of the wiring harness and the connector Hard disk format HDD/2 (HDD2)

Code: C-A101
Description: The communication from ICB to the overall control board (OACB) is blocked.
Causes: Confirmation of the wiring harness and the connector PCI relay board (PCIRB) IC board (ICB) Overall control board (OACB)

Code: C-C101
Description: Initial communication error between OACB/PRCB. When the main power switch (SW1) is turned ON, a response from the printer control board (PRCB) is not received even after a specified period of time elapses.
Causes: Confirmation of the wiring harness and the connector Overall control board (OACB) Printer control board (PRCB)

Code: C-C102
Description: Communication error between OACB/PRCB.
Causes: Confirmation of the wiring harness and the connector Overall control board (OACB) Printer control board (PRCB)

Code: C-C103
Description: Communication error between OACB/OB1.
Causes: Confirmation of the wiring harness and the connector Operation board /1 (OB1) Operation board /3 (OB3) Overall control board (OACB)

Code: C-C104
Description: When the main power switch (SW1) is ON, a region into which no write was made by the ISW is detected in the printer control program.
Causes: S and CA program

‹ First < 29 30 31 32 33 34 35 >

0