• Code: C-0233#
• Description: When the upper limit sensor /3 (PS22) is OFF, PS22 does not turn ON within a specified period of time after the paper lift motor / 3 (M21) turns ON for lifting operation. And at this time, an error detection signal is not detected.
• Causes: Tray 3 paper improperly loaded Tray 3 rear end restriction plate misaligned Confirmation of the wiring harness and the connector Paper lift motor /3 (M21) Upper limit sensor /1 (PS22) Printer control board (PRCB) DC power supply /2 (DCPS2)

• Code: C-0240
• Description: The locking of the paper lift motor (M100) is detected. When the paper lift motor (M100) is ON, an error detection signal of M100 is detected in succession for 1 second.
• Causes: Confirmation of the wiring harness and the connector Paper lift motor (M100) Lower limit sensor (PS101) Upper limit sensor (PS109) LU drive board (LUDB) DC power supply /2 (DCPS2)

• Code: C-0241#
• Description: When the upper limit sensor (PS109) or the lower limit sensor (PS101) is OFF, PS109 or PS101 does not turn ON within a specified period of time after the paper lift motor (M100) turns ON for its lifting or lowering operation. And at this time, an error detection signal (24V cut off) is detected.
• Causes: Confirmation of the wiring harness and the connector Paper lift motor (M100) Lower limit sensor (PS101) Upper limit sensor (PS109) LU drive board (LUDB) DC power supply /2 (DCPS2)

• Code: C-0242#
• Description: When the upper limit sensor (PS109) or the lower limit sensor (PS101) is OFF, PS109 or PS101 does not turn ON within a specified period of time after the paper lift motor (M100) turns ON for its lifting or lowering operation. At this time, an error detection signal is detected.
• Causes: Confirmation of the wiring harness and the connector Paper lift motor (M100) Lower limit sensor (PS101) Upper limit sensor (PS109) LU drive board (LUDB) DC power supply /2 (DCPS2)

• Code: C-0243#
• Description: When the upper limit sensor (PS109) or the lower limit sensor (PS101) is OFF, PS109 or PS101 does not turn ON within a specified period of time after the paper lift motor (M100) turns ON for its lifting or lowering operation. And at this time, an error detection signal is not detected.
• Causes: Confirmation of the wiring harness and the connector Paper lift motor (M100) Lower limit sensor (PS101) Upper limit sensor (PS109) LU drive board (LUDB) DC power supply /2 (DCPS2)

• Code: C-0251#
• Description: When the upper limit sensor / bypass (PS23) or the lower limit sensor /bypass (PS43) is OFF, PS23 or PS43 does not turn ON within a specified period of time after the bypass tray lift motor (M22) turns ON for its lifting or lowering operation. And at this time, an error detection signal (24V cut off) is detected.
• Causes: Confirmation of the wiring harness and the connector Bypass tray lift motor (M22) Upper limit sensor /Bypass (PS23) Lower limit sensor /Bypass (PS43) Printer control board (PRCB) DC power supply /2 (DCPS2)

• Code: C-0252#
• Description: When the upper limit sensor / bypass (PS23) or the lower limit sensor /bypass (PS43) is OFF, PS23 or PS43 does not turn ON within a specified period of time after the bypass tray lift motor (M22) turns ON for its lifting or lowering operation. And at this time, an error detection signal (blowout of ICP) is detected.
• Causes: Confirmation of the wiring harness and the connector Bypass tray lift motor (M22) Upper limit sensor /Bypass (PS23) Lower limit sensor /Bypass (PS43) Printer control board (PRCB) DC power supply /2 (DCPS2)

• Code: C-0253#
• Description: When the upper limit sensor / bypass (PS23) or the lower limit sensor /bypass (PS43) is OFF, PS23 or PS43 does not turn ON within a specified period of time after the bypass tray lift motor (M22) turns ON for its lifting or lowering operation. And at this time, an error detection signal is not detected.
• Causes: Confirmation of the wiring harness and the connector Bypass tray lift motor (M22) Upper limit sensor /Bypass (PS23) Lower limit sensor /Bypass (PS43) Printer control board (PRCB) DC power supply /2 (DCPS2)