Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C252P — Trang 8/13

Code: C2A02

Description: Magenta Toner Cartridge EEPROM access error
Remedy: 1 Clean the connection between the Toner Cartridge and the machine if dirty 2 Reinstall Toner Cartridge. 3 Change Toner Cartridge. 4 Change PWB-MMFP.

Code: C2A03

Description: Yellow Toner Cartridge EEPROM access error
Remedy: 1 Clean the connection between the Toner Cartridge and the machine if dirty 2 Reinstall Toner Cartridge. 3 Change Toner Cartridge. 4 Change PWB-MMFP.

Code: C2A04

Description: Black Toner Cartridge EEPROM access error
Remedy: 1 Clean the connection between the Toner Cartridge and the machine if dirty 2 Reinstall Toner Cartridge. 3 Change Toner Cartridge. 4 Change PWB-MMFP.

Code: C3301

Description: Fusing Cooling Fan Motor/1’s failure to turn
• The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary.
Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M11 operation check PWB-M CNDM1-12 (ON) PWB-M CNDM1-14 (LOCK) L-2. 4 Change PWB-M.

Code: C3302

Description: Fusing Cooling Fan Motor/2’s failure to turn
• The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary.
Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M13 operation check PWB-M CNDM1-14 (ON) PWB-M CNDM1-17 (LOCK) L-1. 4 Change PWB-M.

Code: C3451

Description: Heat. Heater Trouble
• The Heating Roller Thermistor/1 (TH1) and the Heating Roller Thermistor/2 (TH3) fails to raise a given degree of temperature even after the lapse of a given period of time after the Heating Roller Heater lamp/1 (H1) is turned ON. • The detected temperature of the Heating Roller Thermistor/1 (TH1) is lower for a given level of degree than one of the Fusing Pressure Roller Thermistor/1 (TH2) after the Front Door is opened or closed, the Main Power Switch is turned ON or TROUBLE RESET is implemented. • The counter value of zero cross signal input is not updated for a given period of time.
Remedy:

Code: C3452

Description: Press. Heater Trouble
• The Fusing Pressure Roller Thermistor/1 (TH2) fails to raise a given degree of temperature even after the lapse of a given period of time after the Fusing Pressure Heater Lamp (H3) is turned ON. • The detected temperature of the Fusing Pressure Roller Thermistor/1 (TH2) is lower for a given level of degree than one of the Heating Roller Thermistor/1 (TH1) after the Front Door is opened or closed, the Main Power Switch is turned ON or TROUBLE RESET is implemented.
Remedy: 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-M and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-M. 5 Change PU1.

Code: C3461

Description: New Fusing Unit New Article Release
• A new installation is not detected when a new Fusing Unit is installed.
Remedy: 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-M for proper connection and correct or change as necessary. 3 Reinstall Fusing Unit. 4 Change Fusing Unit. 5 Change PWB-M.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie